Sub/port forward build for a pair of SA-12's

[herbykw]

from what i could find, my box dimensions were 41w x 16h x 20d the box did not sit all the way up against the seats. I had to attach the sides and the top and bottom together, put it in the trunk, then put the back and baffle on, then mount the subs. It was a tight fit. I would have to remove the trunk rubber seal, shave the corners of the box down, and remove the trunk latch to get it in, and it still scrapped on the 6x9s and factory amp. Box was 6.13 cubes before displacement.

Edited December 24, 2011 by herbykw

[herbykw]

when i flared my own ports, i didnt take the time to make them sit flush, so they extended out of the box, also i needed to save as much box space as possible.

I thought i had replied to something simular, lol

http://www.stevemeadedesigns.com/board/topic/128759-subport-forward-in-a-trunk-car/page__gopid__1811610#entry1811610

Edited December 24, 2011 by herbykw

[SQMonte]

Homemade aero port FTW! Now I see why they fit, the OD isn't as much as the real 6" precision port, which is 9 1/4"... yours looks more like ~8"...i'm gonna have my box pushed up as close to the seats as possible so I can only go 16" tall, and I want my port(s) flushed into the box....A single 6" aero fits fine.

Updated box dimensions:

So box is shaping out to be 3.9cu.ft, tuned to 33Hz with a single 6" aero port 13" long in a box 19" deep

Thoughts?

[herbykw]

cool, I live in Marysville, not too far.

[herbykw]

I have the flares and a couple 6" ports laying around. Sell it too you cheap if your interested. I will have to check the length though

[SQMonte]

I have the flares and a couple 6" ports laying around. Sell it too you cheap if your interested. I will have to check the length though

The homemade one's? The tube has to be 13" long or it won't work for me

[herbykw]

I have the flares and a couple 6" ports laying around. Sell it too you cheap if your interested. I will have to check the length though

The homemade one's? The tube has to be 13" long or it won't work for me

Sorry, i must have read your last post wrong. I didnt see that you must have yours flush mounted. Mine cant be flush mounted and yes, they flare out to 8".

[SQMonte]

I have the flares and a couple 6" ports laying around. Sell it too you cheap if your interested. I will have to check the length though

The homemade one's? The tube has to be 13" long or it won't work for me

Sorry, i must have read your last post wrong. I didnt see that you must have yours flush mounted. Mine cant be flush mounted and yes, they flare out to 8".

Wow, good guess

My box still isn't set in stone, got some more research to do before I finalize it