Altnator factory

[skittlesRgood]

Okay so under the hood should be 0

Now in the car I run 8 is that okay to do with 3amps

it'll probably be ok for what you are running unless you got really cheap CCA (copper clad aluminum) 8awg. upgrade to 4awg if you can. if you think you might ever upgrade amps in the future to higher powered stuff then just go with 0awg now. itll save you money in the long run.

[SShawn]

Thanks and I'm thinking about just hooking the lights up to the 12 volt power switch in the dash for the amps so they will just be on it was getting old anyways ..

Should I run another 12 volt lead or just continue from amp to amp ?

And I guess I just continue to the next amp for the remote right.

And should I just ground to the same point as the first amp is

[Mario928]

i can tell you this rite now, everyone here will tell you NOT to get anything made by pyle or dual. they are shitty brands producing shitty products.

that being said, you're lucky if you get 600w out of both those pyle amps so you should be fine with stock electrical. if you ground your amps to the chassis then i would definitely do the big 3.

LMAO I didn't want to be the one to say it. I don't like ragging on other peoples equipment but you sir are right.

wasnt trying to be a dick about it, just trying to help the guy out. we all bought cheap shit and lived to regret it and one point.

Almost everyone starts with a lame system. My first system was sony 1200Max with a L5 kicker in a vented box tuned at 60 hz LOL.