jg23's UBL, 08 tahoe FI SP4 18s, aq 3500s

[jg23]

Alrite so I got bored and decided to finally to clean up my volt meter. what I'm going to do is use bondo to make it smooth on the edges and blend in. I'm going to bondo on the whole thing to make it smooth. What I wanted to know is what do u guys think if I painted it white or should i leave it black.

Here's where it goes

Went to get metered at the headrest

On music also

Jus got this today. Thanks to CJ18

[jg23]

Finally replaced the rest of my dome lights

The old bulbs

First thing to break lol

As for the new LEDs. They couldn't handle the bass lol

[jg23]

We are going to meter it in a bit

[jg23]

Here's the small update. Took advantage of the sale

Wanted to see how it would look. (6 LEDs)

No screws holding subs

With a 100 amp fuse

300 amp fuse

300 amp fuse

Meca scores

[jg23]

Finally got some second skin.

Damp pro

Heres around half of one box. (got 2)

Added this also

heres a vid from the next day

[jg23]

C pillars

It sucked doing it like this

New personal best and current state record.

I'm going to have to work hard because there is lots of competition as u can see

This is at the headrest for anyone who doesn't know

Also forgot to post this second skin made a big difference

[jg23]

So I decide to make another box but for a single 18. This box will probly only be used for comps. Mainly because I wanted to get into a lower class for Meca. Didn't get many pics but heres what I got.

Scores are at the headrest

This is with one amp at 38hz. I peak at 39 didn't get much mic time

Put 1 amp per coil. At 39 hz

[jg23]

Haven't updated in a while but I now have a new box and I don't remeber posting this but I switch the alpine f300 for an audison srx 4. Should have new updates in a couple days.

The paint is temporary.

[jg23]

finally got some new speakers as my other speakers have been blown for some time.

alpine type s on the left

Will have a vid soon and my alpine speakers might not b blown

as u can see I had to make the holes bigger

Heres a short distance vid of the new krome audio 6.5s

[jg23]

I finally got an xs d3100. At first I had order it from summit racing and week later I got this. I should have took a pic of the box cause it looked like shit.

Then about a week and a half after that I don't even get the battery I get this.

Finally undamaged, thanks to ray. I got a refund and ordered it from him

Had to make some small changes lol

This is after the car was warmed up. The highest it used to be was around 14.2 but I would drop to 11 or under. If I wired it down I would drop to 9

Got my tweets now. Addictive audio aluminum tweets.

We had to fit them into the old tweeters housing. We jus had to cut those little tabs and glue them with ca glue

new amp

I went to my friends to test the amp and it's working good. As I was there we were looking for spot to place the amp and we were able to fit it under the seat again, we just had to do a few changes. Also decided to take everything out now. I'm going to be removing everything and deadening the floor also running wire over again.