TheNewbie Posted March 11, 2012 Report Posted March 11, 2012 Okay, so me and my buddy (One way) are trying to figure out the measurements to cut.. we put 14.5 for the height of the port. Then 13.75 and the measurement cuts on the left are still the same, were using a double baffle on the top, it's for a level 4 m2 15''. Heres the picture. I need to know the measurements for the sides. If it's 14.5 two top baffles are 1.5 plus thebottom is .75 so that brings us above our height. Uploaded with ImageShack.us Quote Check out my build log: http://www.stevemead...60#entry1958353 Different folks have different strokes.
412 CVX Posted March 11, 2012 Report Posted March 11, 2012 too much port area. port needs to be .75 shorter. Quote Just say no to Ground Pounder Customs. My temp system build log More box buildssome cars do over 170db with one sub, so clearly my two 12"s can do that in my car, with my knowledge too! look out bitches! I'm with captain stupid.
TheNewbie Posted March 11, 2012 Author Report Posted March 11, 2012 Okay, i'll do that but then what about the reading? I move the port height but tyet the cut out on the right is still the same? Does it account for the bottom of the box already? Little confused.. Quote Check out my build log: http://www.stevemead...60#entry1958353 Different folks have different strokes.
TheNewbie Posted March 11, 2012 Author Report Posted March 11, 2012 I can get the port volume .5 smaller or so, but then my net volume jumps up to 3.35 and it's recommended in a 3.25 Quote Check out my build log: http://www.stevemead...60#entry1958353 Different folks have different strokes.
412 CVX Posted March 11, 2012 Report Posted March 11, 2012 I'd ignore that and just model it in sketchup. you can figure it out for sure that way. Quote Just say no to Ground Pounder Customs. My temp system build log More box buildssome cars do over 170db with one sub, so clearly my two 12"s can do that in my car, with my knowledge too! look out bitches! I'm with captain stupid.
412 CVX Posted March 11, 2012 Report Posted March 11, 2012 well then you need to make the box smaller lol. keep about 15-16 inches per cube rather than 20. Quote Just say no to Ground Pounder Customs. My temp system build log More box buildssome cars do over 170db with one sub, so clearly my two 12"s can do that in my car, with my knowledge too! look out bitches! I'm with captain stupid.
TheNewbie Posted March 11, 2012 Author Report Posted March 11, 2012 We modeled it in sketchup already. Just not sure to put 14.5 for the side height or minus .75 because of the extra baffle. Quote Check out my build log: http://www.stevemead...60#entry1958353 Different folks have different strokes.
TheNewbie Posted March 11, 2012 Author Report Posted March 11, 2012 Lol, all that work and im starting to cut out stuff.. can't seem to find the right measurements Quote Check out my build log: http://www.stevemead...60#entry1958353 Different folks have different strokes.
TheNewbie Posted March 11, 2012 Author Report Posted March 11, 2012 You never did send me that sketchup of the box you pmed me haha. Quote Check out my build log: http://www.stevemead...60#entry1958353 Different folks have different strokes.
412 CVX Posted March 11, 2012 Report Posted March 11, 2012 here give me a sec.. i'll give you a proper design first. Quote Just say no to Ground Pounder Customs. My temp system build log More box buildssome cars do over 170db with one sub, so clearly my two 12"s can do that in my car, with my knowledge too! look out bitches! I'm with captain stupid.
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.