franky8989 Posted April 11, 2012 Report Share Posted April 11, 2012 Hi guys, I have 2 MTX 81001 Monoblock amps hooked up to a common bus bar. After taking the batteries out the other day for a top up and putting them back in, i turned the system up and noticed sparks flying off the positive terminal. After closer inspection noticed that both the Pos and Neg terminal had heated up to the point that the solder had melted in them. The next day i got some figures with the DMM and found that one Amp was getting the corret volatge however the other was only getting 10-10.5v at the amp. Any body got any ideas to what has caused this and what could be the solution? Rockford Fosgate 3sixty.3 Front stage - 2 x RF P2 8" midbass 6 x jl audio c5-650 mids 4 x Hertz HT28 Tweeters JL audio 300/4 amp Rockford Fosgate 800-4AD amp 2 x MTX 9512-44 Subs 2 x MTX 81001 mono amps 2 x Optima D34 Yellowtop Stinger HPM 0 Gauge Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.