Porting help!!!

[Minigopherv25]

I have a Fierce Audio Dual 12" Sealed PS212.1 (1.15 cubic feet per chamber) with 2 Rochford Fosgate P2D212 (rms 250). I wanna port that box, but I want to still feel it as much as I do know but I want it louder. If I can haha

I also have an Alpine Type R SWR-1243 in a 1.0 cubic feet box. I wanna port that but I want to still feel it as good as I do know.

I just wanna know if I can do that and what frequency to tune it at and where to put the port.

Help please!!!

Thank you!!

[Crandis16]

A lot of it really depends on what kind of vehicle that you have. A lot of people suggest 34Hz. I personally am going for 35Hz and I am undecided on if I want to seal off my trunk and have the port firing into my car or have it mounted in the back of the trunk firing towards a corner. It all depends a lot on how you position your box.

[aerickson]

I have a Fierce Audio Dual 12" Sealed PS212.1 (1.15 cubic feet per chamber) with 2 Rochford Fosgate P2D212 (rms 250). I wanna port that box, but I want to still feel it as much as I do know but I want it louder. If I can haha

I also have an Alpine Type R SWR-1243 in a 1.0 cubic feet box. I wanna port that but I want to still feel it as good as I do know.

I just wanna know if I can do that and what frequency to tune it at and where to put the port.

Help please!!!

Thank you!!

what kind of car is it.

[Guest]

dont bother porting an already sealed prefab box. best bet is to build an entirely new one.

[Minigopherv25]

It's a 1994 Ford Taurus

[audio1der]

dont bother porting an already sealed prefab box. best bet is to build an entirely new one.

+1

Not trying to be difficult (or a prick) but those boxes are too small to become ported enclosures for those subs. Not to mention the volume f the port which needs to be accounted for...

If you do figure out something/build a new box, I prefer a 36Hz tune for a daily driver. That's personal preference- find out what guys with similar car to yours tune to and see if you like the way it sounds.