DD-1 and MS-8

[Mike Davis]

Has anyone used the DD-1 with an MS-8? Setup is: Alpine x305s > MS-8 > Massive NX4 & Massive N2. Hu adjust works great, If i run the HU straight to the amp i can adjust without problems but when the MS-8 is in the mix I can't get a signal, HU volume is at max before distortion and no matter what I set the volume of the MS-8 at I get no signal on the DD-1.

I ended up just adjusting the amp gains with the signal straight from the HU and then recalibrating the accoustic measurememnt of the MS-8. Sounds great but I just want mnake sure there wasn't something i missed or if this a known issue with the MS-8...etc.

Thanks.