yUmadBro Posted June 29, 2012 Report Share Posted June 29, 2012 orted @ 35 HZ: 3.5 ft^3 Displacement: 0.15 ft^3 Depth: 6.25" Outside Diameter: 15.125" Cutout: 13.875" Heres some pics and measurements sorry their not that good and hard to visualize Measurements of trunk Trunk opening: 39 1/2 " Backseat to end of trunk: 40" Floor from brake light to brake light: 46" The inner trunk to floor is 21" The side of the trunk to floor is 19" The trunk bars are both 18" 10" back seat opening along floor 33" along the floor of the rear seats 39" from left wheel well to right wheel well I'm looking for a bit of a different design.. I'd either like to kind of center the sub OR some aero ports through the backseat opening or the back seat cupholder fold out. Pretty sure I have enough measurements posted already but if i dont please let me know. Skar suggests a 35 hz tuning for a ported enclosure but I know the design im looking for will affect the tuning. The subwoofers going to be ran off a hifonics zeus 500.2. I dont have a preference about subs or aeros facing up or forward. Just either really would like the sub in the opening in the pic below or the aero ports through the cupholder slot. Anyone who might wanna take a shot at a design would be great I can't really work with sketchup to well. Thanks for any input. Link to comment Share on other sites More sharing options...
Recommended Posts