archos Posted July 17, 2012 Report Share Posted July 17, 2012 ok im new so if this has been asked 100k times im sorry in advance. i would like some advice on how would i set my gains with the dd1 if i use the stock headunit in my 2010 speed 3 and run it through a 3sixty.2 or .3. would i check it before it goes into the .2 to find max voulme, then check it at the amps after the .2? or would i check it only after the .2? i watched the videos on you tube and dident see anything relating to the subject. ill keep searching but was thinking someone got experance in this. Quote Link to comment Share on other sites More sharing options...
dog24fret Posted July 17, 2012 Report Share Posted July 17, 2012 Check before and after it then the amps I would think. Someone may correct me if I'm wrong but it should be the same as anything else. I've not used a 3sixty.2. Quote Cowboy Escort GrAnny ThUmper The Burp Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.