yUmadBro Posted July 31, 2012 Report Share Posted July 31, 2012 I'm looking at either adding two Selenium or Audiopipes upfront in both stock 6.5 locations. Which one do you guys think may perform better? I'm looking to drop two of either into the rear deck. Do they need crossovers even though there will only be on speaker on each side of the front and back stage? Never used crossovers before so I'm not sure how they work. Don't really need them to scream but I'd like if it didnt get drowned out by bass. Quote Link to comment Share on other sites More sharing options...
New2Dis Posted July 31, 2012 Report Share Posted July 31, 2012 if u want ur speakers to play at their optimum level , get xovers, most amps today have sum sort of crossover network, what amp do you have? Quote "Damned if i do, damned if i don't..."Sold to: RodeoSport, deeppinkdiver, kevosinn, CortezDTV Bought from: SlamminBeats, Carboardcat15 Link to comment Share on other sites More sharing options...
yUmadBro Posted July 31, 2012 Author Report Share Posted July 31, 2012 (edited) I plan on running them at 2 ohms on a hifonics 500.2 zeus. Edited July 31, 2012 by yUmadBro Quote Link to comment Share on other sites More sharing options...
yUmadBro Posted July 31, 2012 Author Report Share Posted July 31, 2012 Also I have a Hifonics 600.4 dont know what which to use Quote Link to comment Share on other sites More sharing options...
Mikey Bates Posted July 31, 2012 Report Share Posted July 31, 2012 . Which one do you guys think may perform better? no vs thread, its kinda slipped in there. . . crossovers yes. orrr you could run active, but that amp wouldnt work for that Quote Link to comment Share on other sites More sharing options...
yUmadBro Posted July 31, 2012 Author Report Share Posted July 31, 2012 I have 2 sets of cadences on that amp right now. It works Quote Link to comment Share on other sites More sharing options...
New2Dis Posted July 31, 2012 Report Share Posted July 31, 2012 if this is ur amp http://www.sonicelectronix.com/item_44495_Hifonics-ZRX500.2.html ur crossover settings are pretty good if they are true Variable high-pass filter (60-13000 Hz, 24 dB/octave) Variable low-pass filter (30-250 Hz, 24 dB/octave) Quote "Damned if i do, damned if i don't..."Sold to: RodeoSport, deeppinkdiver, kevosinn, CortezDTV Bought from: SlamminBeats, Carboardcat15 Link to comment Share on other sites More sharing options...
yUmadBro Posted July 31, 2012 Author Report Share Posted July 31, 2012 Yeah thats the one. So just using crossovers on my amp is fine or run a 2way crossover? If I don't need to run the crossover that's even better Quote Link to comment Share on other sites More sharing options...
Mikey Bates Posted July 31, 2012 Report Share Posted July 31, 2012 (edited) I have 2 sets of cadences on that amp right now. It works i didnt say it wouldnt work with crossovers. i said it would work if you want to run active. .. edit, but i also just saw you have a 600.4. thought you were working with only the 2 channel my bad. run active then, with crossovers. be soundin sweeet Edited July 31, 2012 by Mikey Bates Quote Link to comment Share on other sites More sharing options...
Guest Posted July 31, 2012 Report Share Posted July 31, 2012 Yeah thats the one. So just using crossovers on my amp is fine or run a 2way crossover? If I don't need to run the crossover that's even better you're going to have to run an xover whether you like it or not. you either buy an external one or use the one built into the amp. you dont want to have full range going through speakers such as those. hence the need to filter those unwanted frequencies out. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.