need help on wiring some mids

[99blazer]

I have a 99 blazer and I have a ZXi80.4 powering my mids. I wanted to know how i could wire up a 6 speakers to it and keep it running good. Right now Im running infinity kappas upfront and 6x9 kappas in the very back. im wanting to add 2 more in the rear door and i was wonding how i would wire that. or even if it would be a good idea to just run bullet tweeters in my kicks with the other 6 speakers. Im open to any help on this one

[Guest]

infinity eww.

arent those 2 ohm speakers? you could wire in series to raise the ohm load, but then each speaker would be getting like 30w or something.

[SlamminSL1]

Run the amp at 2 channels bridged and wire the left doors in series so they are 8 ohms. Then bridge the rear 6x9 with the doors to see 6 ohms total. Do that for each side and you're set.

This is assuming all the speakers are 4ohms. You need to clarify.

[SlamminSL1]

Like this. And yes, it's a pain in the ass to do it like this.

[SlamminSL1]

lol forgot the pic.

[99blazer]

there all 4 ohm

[SlamminSL1]

Then yeah you can run them like in the picture.