AMP LPF and HPF, got new component speakers. need help.

[pintich]

hey, i dont know how to tune this sett up right now... i got my B2 components (ES6.1) and a 4ch amp. and am i going to use the LPF widh this? look at the pics hard to explain

so this will just take 2 ch's one left ch and one right ch.. so do i need to set the LPF on any? or is the crossover fixing all this? try to explain this for me

[Wizzy]

ok. if this is your amp you can use the right side inputs. xover goes to hpf. the crossover does his job for the tweeter. it cuts the freq at 2.5 or 3 khz but doesnt act like a subsonic. so i recommend to set hpf to 80 - 100 hz depends on power.

[pintich]

ok. if this is your amp you can use the right side inputs. xover goes to hpf. the crossover does his job for the tweeter. it cuts the freq at 2.5 or 3 khz but doesnt act like a subsonic. so i recommend to set hpf to 80 - 100 hz depends on power.

okey thanks for the help, and yes thats my amp

[Wizzy]

connect the tweeter first to -12 and listen it and if you feel like needing more move to -6db. try not go over +3 at your players settings for bass mid and high and it will sound fine.