Lyferxb9s Posted June 20, 2013 Author Report Posted June 20, 2013 I'm stationed at Fort Dix, NJ. These mids sound great. I have them crossed at 50hz running off an AP APSM2075 mini at .5 bridged lol
Lyferxb9s Posted July 1, 2013 Author Report Posted July 1, 2013 Ok well the lows just aren't what they should be. Going to try polyfill in the sealed chamber. If that doesn't help I will look at increases my sealed chamber more.
Lyferxb9s Posted July 6, 2013 Author Report Posted July 6, 2013 Some small updates. Before and afters. A little crooked. Need to adjust.
Lyferxb9s Posted July 7, 2013 Author Report Posted July 7, 2013 Also just ordered this charger http://www.batterychargers.com/ProductDetail.aspx?ProductName=94026806ACP
Lyferxb9s Posted July 8, 2013 Author Report Posted July 8, 2013 Anyone think it will be worth upgrading from the aluminum buss bars to copper?
Lyferxb9s Posted July 8, 2013 Author Report Posted July 8, 2013 anyone? it'll cost me about 80 bucks.
COLTON94 Posted July 9, 2013 Report Posted July 9, 2013 For $80 theres better upgrades you can do. Their close enough in conductivty you wont notoce fhe difference
Lyferxb9s Posted July 9, 2013 Author Report Posted July 9, 2013 Damn alright. I just noticed my voltage drop is much worse ( down to 12.4) with the buss bars than it was with the Abortion of wires I had before.
Lyferxb9s Posted July 10, 2013 Author Report Posted July 10, 2013 Well I got the new charger. supposedly it's good at bringing back very badly discharged batts. So I had a red top sitting the garage that was resting at like 9.4 So I put it on there at 6amp for a few hours till Ill drop it to 2amp before bed. See if it can save it. I also have a lead acid battery that is resting low so we will see how it does on that. When hooking the charger up to my jeep overnight to top off all 4 batteries what amperage would you guys recommend charging at , 2, 6, or 12?
Recommended Posts
Archived
This topic is now archived and is closed to further replies.