Needing Opinions

[atomic12]

i have a 96 honda civic and i can only fit i single din radion in the stock spot and my ac controls are not elctrical. i want to put a 2din radio in mycar cuz i put a flip out in there but i hate the motorized face i have broke 2 of them and i just put another type of radio in there... how much normal does it cost to get a new dash fiberglassed to fit one?

[Aaron813]

I would go pioneer for a double din on the subject of the dash i would say to make one for it

[atomic12]

well i gettin a jvc head unit i just don't know how to make the dash pice and i don't know how much its goin to cost me

[Aaron813]

can you get some pics of your dash for us to see

[atomic12]

i will when i get off work. but it sucks if they were elctronic ac controls i could just get them moved down low were the old tape deck was which is by the cup holds. but since there not electrical i cant do that so now i just gotta find a way to do this. i have ac controls below the radio and ac vents above.. i might try and get the ac vents to be on the sides of the radio and move the radio up.. i will draw up a design on my computer after i take pics and show ya what i thinking i'm goin to have to do

[Aaron813]

I was just going to say that or you could do what Steve did to his civic and just completely elminate the ones in the middle here is a ink to his pics of his here scroll down about half page or so and he is putting one in his civic

[atomic12]

thats what i wanted to do but i was told by an installer where i work that the ac units wouldn't be able to go down there cuz they are not electrical

[Aaron813]

hmm then i dont know what to tell ya maybe make a custom pod so to speak that holds the radio out side of it or something like that

[atomic12]

i was thinkin of cutting the ac vents and putting them on each side of the radio and using the old spots to be were the top of the radio would go. cuz i don't wanna take those vents out.. they are the main 2 vents

[Aaron813]

That sounds like it would work