JustinWillmon Posted July 22, 2013 Report Share Posted July 22, 2013 Gonna be using 2 RF P3 Shallow mount in the kicks for my midbass. Should i run them at 2 ohm or 4 ohm? I havent ordered them yet so i could run either, and i have yet to pick out an amp but i didnt know if there was an advantage to either other than more power at 2 ohms obviously. Im guessing its just personal preference, but just wanted to see what you all think. Link to comment Share on other sites More sharing options...
Jessica Posted July 22, 2013 Report Share Posted July 22, 2013 Depends on your amp. They are rated for 150 watts, so keep that in mind. edit: i am assuming you mean the 8's Rest in peace, walled 87 accord build log 03' Corolla build with AA Mayhem inside. My super random youtube channel and terrible camera work. Wiring comparison by CaptainzPlanetz Wire and fuse guide by Guest SyKo13 Link to comment Share on other sites More sharing options...
JustinWillmon Posted July 22, 2013 Author Report Share Posted July 22, 2013 Yeah sorry i thought i posted, but yes the 8's. Havent picked out an amp yet, so guess i should pick out the amp first? Link to comment Share on other sites More sharing options...
Jessica Posted July 22, 2013 Report Share Posted July 22, 2013 Yeah, that will let you decide coil config. Find something that does 150X2 stereo @2ohms and get the d4, or get something that does 150x2 stereo@ 4ohms and get the d2. Those need .25cuft of airspace sealed, but i think they might perform ok in less space if you are using them for midbass. Rest in peace, walled 87 accord build log 03' Corolla build with AA Mayhem inside. My super random youtube channel and terrible camera work. Wiring comparison by CaptainzPlanetz Wire and fuse guide by Guest SyKo13 Link to comment Share on other sites More sharing options...
JustinWillmon Posted July 22, 2013 Author Report Share Posted July 22, 2013 Alright sounds good. I think with as much room as im gonna have in the kicks when i glass them, they should have enough air space. Hopefully will fill in the void between my subs and components nicely. Link to comment Share on other sites More sharing options...
JustinWillmon Posted July 22, 2013 Author Report Share Posted July 22, 2013 What do yall think about the RF T400-2 to push these? 200 watts at 2 ohms, as long as i set it with the DD-1 surely they can take 50 watts more than rms. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.