ZachG Posted December 4, 2013 Report Share Posted December 4, 2013 I need a quick box design for someone to make real quick for a sealed 12. I dont have my computer at the moment only my phone. Just need a screen shot or the specs for the box. Its sealed so should be quick to do. its going in the back of a jeep wrangler jk. the measurements are: 11.5 depth from tailgate to seat 15 height to top 26 length Imlooking for 1 to 1.25 cubic feet. And the depth can be decresed up to 9" which I would perfer thanks guys 1998 Pontiac grand prix gtp supercharged2 12" Obsidain Audio V.1 on a 2011 zx1500.1 at 2 ohms. 20ft of Knuconceptz CCA 0 Guage. 2nd Battery is a Shurken BT-120. Box is 3.5cu tuned at 31.8hz sealed off from the trunk. 14sqft of Dynamat on the Rear deck top & bottom. Soon to be more for doors/roof. Gets low & loud Did a 140.5 Sealed at Battle of the boom in June 2013 dropping to 12.7v (need a alt mines going bad) Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.