2006 Corolla (Da C) Loud and & clean system install from day 1 to now ( BEYMA,ORION HCCA, SELENIUM & more). New floor carpet and Fatmat entire floor

[Crandis16]

are you buying and using pre-fab boxes???

your work looks good

[htce22]

We'll for now until my trunk build is done and air ride suspension is Installed I'm, because once the air ride and trunk build is done im going to sell the 10 inch orion with the box and keep my 15 inch orion hcca and appercaite it man

[htce22]

correct 6.5 inch are just for midrange no bass and thanks

[01 S-10]

Build looks great! Curious though why did you get 800 hz crossovers? That's extremely high, 100 hz seems like what you need

Edit: I may have missed it are the 6.5s just for midrange, and not midbass?

[htce22]

Well my new rca's came in today from knukonceptz which are 2, 1 female to male rca adapters, Im replacing the ones on my vocal amp now because one of them went bad so im just going to replace both. Quality on them is real good and as always great pricing and fast shipping from knukonceptz

comparison of new vs old

[htce22]

when the old rca's were connected to the vocal amp

the knukonceptz rca's connected to amp

taped up the ends so they dont touch the metal of the back seat

[htce22]

Since it was a real nice sunny day out today in jersey, I decided to go to my boys job and got the passive crossovers installed and soldered FINALLY because of the weather this task has been delayed for almost 3 weeks now. Reason why I'm getting the passive crossovers soldered and connected is because there's bass going through my midrange 8 inch and 6.5 inch beyma speakers

Taking the wires of the amp and getting ready to be soldered

Cut the old ends of the speaker wire and getting the new ends ready for solder

Here's the passive crossover

Wrapping the wires on the passive crossover

Soldering the passive crossover

Lol my boy joking around

[htce22]

One side done time for the other one

[htce22]

After soldiering 5 passive crossovers is complete







Taping up the ends of the passive crossover after soldering is done







Here is the final product

This picture I found is when me and my boy did the back 2 doors beyma tweeter passive crossover and tucked on the back left side panel and wrapped it up with black electric tape

[htce22]

Once the crossovers were complete and installed and tucked away nicely. I connected just the front 2 doors on my crunch amp which is a temporary amp for now until the trunk build is done. Only the front doors can be connected to the amp without tripping the amp and I made a video to show how the doors are playing with no bass going through check it out guys

Recorded this with my iPhone 5S it wasmt really catching all the sound so mind the hissing sound you hear that's just the microphone not catching the sounds from the door correctly