Jump to content

Kicker, Ascendant Audio Build Log Completed Pics!


Recommended Posts

This will be my most current build log. I have been competing in bass race for a while now and I wanted a little change from my previous setup. Previous system consisted of (2) 15” BTL’s (fully loaded) with (2) Kicker ZX2500.1’s. The stuff I have had and that I will leave alone are my Kicker SS Components, as well as Kicker 6.5” midbass, which run off a Kicker ZX850.4. Power will be the same, from Kinetik batteries, and a 200amp Irragi HO Alt. Sound deadening is from Secondskin audio, 2 layers throughout the entire car. I will go ahead and share some pics of my previous builds to show you what was in there prior to what I will be working on now.

First the wiring, Kicker 1/0 Hyperflex wiring FTW!!! This stuff is awesome!!

Posted Image

Fuses and RCA’s from KnuKonceptz

Posted Image

Iraggi Alt

Posted Image

Two shop packs of Damplifier Pro! Great stuff!

Posted Image

Posted Image

Posted Image

Posted Image

Nobody makes me bleed my own blood, NOBODY!!!

Link to comment
Share on other sites

I had to make some custom adapters for my components and midbass’s. I cut them out of ¼” mdf and then I used this rubber coating to prevent noise, moisture or anything else messing with them. Also, I didn't get pics, but I put dynamat all around the speaker to prevent any rattles or anything like that.

Posted Image

Posted Image

Posted Image

Posted Image

Posted Image

Posted Image

Nobody makes me bleed my own blood, NOBODY!!!

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Who's Online   1 Member, 0 Anonymous, 496 Guests (See full list)

×
×
  • Create New...