gibblegeibel Posted June 27, 2014 Report Share Posted June 27, 2014 i have a inline 6 ford 300 4.9l, i am want to put a turbo on it. i know i have to upgrade internals to forged parts, get intercooler and charge pipe for the turbo. what else to the engine do i have to do to get it ready for a turbo? Link to comment Share on other sites More sharing options...
Popwarhomie Posted June 27, 2014 Report Share Posted June 27, 2014 Get on ford-trucks.com Plenty of info on turbo 4.9s. The stock block will handle 12psi just fine. Tuning is the fun part. 2010 Focus coupe- 8 12" wall. 157.5@46hz 2016 Focus ST - SQ build. Link to comment Share on other sites More sharing options...
FknCrawler Posted June 27, 2014 Report Share Posted June 27, 2014 Oil catch can. bigger injectors. downpipe **Do lots of research** 1992 Honda Civic CX Hatchback K24a2 Swap Link to comment Share on other sites More sharing options...
Neckbeard Posted June 27, 2014 Report Share Posted June 27, 2014 full exhaust wouldn't hurt! Build log, Super slow!!: http://www.stevemeadedesigns.com/board/topic/168096-slow-neckbeards-1970-opel-gt/ Link to comment Share on other sites More sharing options...
TuanTrang Posted June 27, 2014 Report Share Posted June 27, 2014 Check out turbokits.com. You will know what to get for your specific vehicle. Link to comment Share on other sites More sharing options...
Popwarhomie Posted June 27, 2014 Report Share Posted June 27, 2014 It will all have to be custom for an OBS f150. 2010 Focus coupe- 8 12" wall. 157.5@46hz 2016 Focus ST - SQ build. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.