cassshhhtela Posted July 3, 2014 Report Posted July 3, 2014 Hi, recently, some friend gave me 2 Oz Audio Matrix Elite subwoofers but i have some questions about how to make them works fine. I have a Memphis 16-ST1000D classic amplifier and my questions are: 1.- Measurements for a ported box 2.- My amp is enough for these subs? Amp specs 1 x 300W @ 4 ohms (0.75% THD) 1 x 600W @ 2 ohms (1.0% THD) 1 x 1100W @ 1 ohm (1.2% THD) S/N Ratio: >95dB Freq. Response: 10Hz ~ 650Hz (± 1dB) Efficiency: 90% Fuse: 2 x 40A Dimensions 13.4" x 6.5" x 2" (34cm x 16.5cm x 5.1cm) Sub specs 12" Dual 4 Ohm Matrix Elite Series Subwoofer Power Handling: Peak: 1400 watts RMS: 700 watts Impedance: Dual 4 ohm Glass Fiber and Nomex Cone UV-Treated Foam Surround Competition style aluminum die-cast basket Underlap cone attachment The spider assembly comprised of blended cotton & nomex, called conex, results in a material that is flexible like cotton, yet has the tensile strength of nomex. Additionally, the lead wires are interwoven into the spider to eliminate breakage during extreme SPL. Cross-Vent intercooling through the basket to allow the voice coils to remain cool during operation. 2.5" 4 ohm Dual voice coils on a glass former 150oz. Triple magnet motor assembly Frequency response: 20-500 Hz Sensitivity: 86 dB Thanks for your help.
Recommended Posts
Archived
This topic is now archived and is closed to further replies.