realsoundillusion Posted September 16, 2015 Report Share Posted September 16, 2015 Hi All, Just need advise, will the below box design work for my application. Any advise is welcome. Remember I'm new to this low frequency building, have gained a lot of experience with SPL over the past few months. Thanks to those that have questioned, guided and given constructive critism. Ok so here it goes I'm open to ideas as well. Driver Properties Name: SA Type: Standard one-way driver Company: Sundown Audio Serial No: SA12 No. of Drivers = 2 Mounting = Standard Wiring = Parallel Dual voice coils = separate Fs = 33.71 Hz Qms = 0.52 Vas = 21.21 liters Xmax = 30 mm Sd = 13.71 sq.cm Qes = 0.58 Re = 4.57 ohms Le = 3.4 mH Z = 5.484 ohms Pe = 600 watts-----------------------------------------Box Properties Name: Type: Vented Box Shape: Prism, square Vb = 139.6 liters Fb = 37.13 Hz F3 = 35.45 Hz Fill = minimal No. of Vents = 2 Vent shape = round Vent ends = two flared Dv = 120 mm Lv = 250 mm Will this work???? Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.