cmichael Posted December 2, 2015 Report Share Posted December 2, 2015 Hi Steve, I'm having a second issue with the AMM-1 (firmware v3.8 ) regarding power measurements. Using Live/Realtime Pwr, when the frequency of my test tone exceeds 1KHz, the PF abruptly cuts in half, roughly. For example, at 1.00KHz (and below) PF=89 and at 1.1KHz (and above) PF= 50. This causes the measured power to drop by 50%, also. On the DSO I can see no change in the waveform whatsoever when changing from 1KHz to 1.1KHz (besides a tiny increase in frequency). This problem is completely independent of input power, clipping, etc. This is a serious issue for me because it's preventing me from using the AMM-1 to make meaningful measurements for the project I'm working on. Any info appreciated, thanks. - cmichael Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.