Artiflex Posted June 20, 2019 Report Share Posted June 20, 2019 Here is a very crude drawing of what I have in my head for the layout of the electrical portion of my system. Laughing is welcome. Lol. I have everything from the hood up to the trunk done as far as electrical goes... This is about everything from there back. All wire is 1/0 skyhigh OFC, 300a JS alt, 3 xp3000's, sundown ns1, 2 zv5 12s . The questions are these: 1. Do I need to run a ground to the frame for each battery in the bank or just tie them together as shown in the picture with 1 ground run going to the frame? 2. Since my amp has three power inputs, do I need to run 3 power wires from the battery bank to the distro then 3 runs to amp OR is the 1 run going from the bank to the distro then 3 runs to the amp in the picture enough? 3. Same goes for grounds. There are three ground inputs. Do I need to run 3 grounds from the bank to the amp and then run 3 grounds from the bank to the frame OR will 3 runs from the bank to the amp and then 1 ground to the frame from the bank be enough? If the answers are yes I do need to match the 3 power/grounds from the amp then... 4. Do I need to run 3 power/ground runs each between each battery in the bank as well? Since my box is taking up the entire trunk space (have to build in trunk), I will be putting the battery bank in the spare tire wheel well. I will not be able to access the batteries after I build the box. This is why I am trying to find all of this out before I can actually test the system electrical. All input is welcome. If anyone notices anything else wrong please chime in. Thanks! Link to comment Share on other sites More sharing options...
Artiflex Posted June 24, 2019 Author Report Share Posted June 24, 2019 Anyone have any input on this ? Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.