DDaudioforLife559 Posted August 27, 2019 Report Share Posted August 27, 2019 Wat box specs i need to build a single 12 box for sp4 12 Fi tuned at 32hz running of a cresendo bc 3500k plz help Link to comment Share on other sites More sharing options...
BYTizzle Posted August 27, 2019 Report Share Posted August 27, 2019 What are the dimensions of the space you have available? Link to comment Share on other sites More sharing options...
DDaudioforLife559 Posted August 27, 2019 Author Report Share Posted August 27, 2019 I have a 2015 chrysler 200 big trunk had a few systems in there already but ima go with doin a single 12 setup i got 2 sp4s but power only for one i had a 15 in there box was 36w16 3/4 H 20 depth so i got room any ideas on design Link to comment Share on other sites More sharing options...
DDaudioforLife559 Posted August 27, 2019 Author Report Share Posted August 27, 2019 You kno wat fuk it ima run 2 wats a good design for a 2015 chrysler 200 2 Fi sp4 12s Link to comment Share on other sites More sharing options...
BYTizzle Posted August 27, 2019 Report Share Posted August 27, 2019 Its going to be a BIG box from what I can see to meet the required air space, port area, and mounting depth of those subs. The suggested enclosure specs for those are pretty vague too, and since I have no experience with them specifically, I went with something in the middle of their 1.8/3 cubes net per sub. But: 36w, 16.5h, 26d, 15h by 6w port 36" long puts you at 4.85 cubes net at 32.6hz with 90sqin of port area. That would be a 3 common wall L port box, you could prolly do a center port 2 common wall box but Im no help if you want to go that route. Link to comment Share on other sites More sharing options...
DDaudioforLife559 Posted August 27, 2019 Author Report Share Posted August 27, 2019 Big box maybe sacrifice depth to 23inch and height to 14 1/2 to 15 inch should be good i can do 38 width aswell Link to comment Share on other sites More sharing options...
DDaudioforLife559 Posted August 27, 2019 Author Report Share Posted August 27, 2019 My last dual 12 box for Fi ssd was. 38w14 1/2 h 23 1/2 depth 33hz Link to comment Share on other sites More sharing options...
DDaudioforLife559 Posted August 27, 2019 Author Report Share Posted August 27, 2019 Would i be ok with same box Link to comment Share on other sites More sharing options...
BYTizzle Posted August 27, 2019 Report Share Posted August 27, 2019 38x15x24 with a 13.5x6 at 40" long port puts you right around 4 cubes net 33hz basically. drops port area to 81sqin. Link to comment Share on other sites More sharing options...
BYTizzle Posted August 27, 2019 Report Share Posted August 27, 2019 Should work since you will be a little light on power! Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.