Evan Posted March 25, 2020 Report Posted March 25, 2020 Hey guys just curious if anyone has any experience with the Zapco ST-4X DSP amp? I'm considering it for my build and was wondering if it was a good buy or not. Thanks!
NoDestiny Posted April 30, 2020 Report Posted April 30, 2020 Hi, I signed up to this forum (finally) JUST to reply to you. I had the Zapco ST-6X DSP amp for a short while. It had a TON of issue... -No gain control -DSP causes random "static" sound once in a while, must power cycle to rid of -Output channel send signal ~2 seconds before amp output signal -Turn on thump on output of output channel -Firmware update is a terrible process and fixed nothing -After several days, customer service from Zapco has yet to contact me on the issues. I ended up sending it back and getting the ST-6X SQ and putting the $100 saved towards a MiniDSP. I don't know of the 4X DSP is in the same boat, but be warned on my experience.
Recommended Posts
Archived
This topic is now archived and is closed to further replies.