Box Design Verification

[seductivesounds]

I have modeled up a box for a 12" Fi.SSD

Now I'd just some of you box builders to just verify what I've done.

And let me know if its good or not

Here is a pic since they're worth 1000 words:

Port and Sub displacement has been accounted for.

Where would be the best location on the port side to place the sub?

I dont quite understand port loading and such.

Thanks in advance

[dr.db]

Looks good,just make sure to round over the port opening and the end of it as well....myself I would put the sub near the port opening...with a few 45's as well...how much power you running??

[seductivesounds]

Looks good,just make sure to round over the port opening and the end of it as well....myself I would put the sub near the port opening...with a few 45's as well...how much power you running??

Ya for sure round off all the port edges and 45's in the corners

How far would you be putting the sub from the port opening?

Its for a co-worker.

He's running 600-650@2ohm, so it might be a little more being its got dual 0.7 coil.

Something like this?