Jump to content
Sundown Audio

Recommended Posts

Posted
put them on ebay change your pic in avitar buy a stetsom or sundown...

id prefer a couple of sundown 3000d's but i dnt know if i can afford them or if i can even get them arnt they hard to find???

*2013 NEW BUILD*

12- 18" Crossfire XS v2's B pillar 4th order wall

4- Crossfire 8K mono blocks

40+ pro audio mids tweeters and horns

3- Singer alternator 400a external regulated alts

tons of audiotechnix wire

24- XS Power D1400's

-TEAM XS POWER-

-TEAM CROSSFIRE-

-TDH-

tdh.png

Posted
Do you have a Line Driver to keep the RCA Voltage up?

would that matter b/c i can undo all the amps but one and no other rca's and it still does the same ....

but no dont?

and my friend has the same amp except with a 2- 12" setup not big atall and his does the same????

*2013 NEW BUILD*

12- 18" Crossfire XS v2's B pillar 4th order wall

4- Crossfire 8K mono blocks

40+ pro audio mids tweeters and horns

3- Singer alternator 400a external regulated alts

tons of audiotechnix wire

24- XS Power D1400's

-TEAM XS POWER-

-TEAM CROSSFIRE-

-TDH-

tdh.png

Posted (edited)
id prefer a couple of sundown 3000d's but i dnt know if i can afford them or if i can even get them arnt they hard to find???

sundowns should be real easy to find they have their own section on here have you checked the sub wiring try a different sub in differnt box to see if it still does it.

Edited by jmsonoma03
smdsig2.jpg
Posted
would that matter b/c i can undo all the amps but one and no other rca's and it still does the same ....

but no dont?

and my friend has the same amp except with a 2- 12" setup not big atall and his does the same????

Sure it would help :) Sorry just asking questions to try and help you better. It really sounds like a Voltage issue or something of that nature.

Not sure why your buddy's amp would be doing the same thing. I would contact JBL and see what they say before doing anything else.

Maybe try setting the gains a tad lower then what you have them set at now?

Posted
how did you do the remote wire, did you use relays?

no....

i have them looped for now i was just throwing the amps in to see if they did the same thing agn.....

could remote wire cause all that???

and y would an older amp work fine but these new ones cut out???

if you think the relay's will help ill do that 2maro.....

i just rly am wiggn id like to run my jbl's but as of right now its not looking to good....

*2013 NEW BUILD*

12- 18" Crossfire XS v2's B pillar 4th order wall

4- Crossfire 8K mono blocks

40+ pro audio mids tweeters and horns

3- Singer alternator 400a external regulated alts

tons of audiotechnix wire

24- XS Power D1400's

-TEAM XS POWER-

-TEAM CROSSFIRE-

-TDH-

tdh.png

Posted
would that matter b/c i can undo all the amps but one and no other rca's and it still does the same ....

but no dont?

and my friend has the same amp except with a 2- 12" setup not big atall and his does the same????

sounds like a shitty amp if you have seen 7 do the same thing how are the gains set

smdsig2.jpg
Posted
no....

i have them looped for now i was just throwing the amps in to see if they did the same thing agn.....

could remote wire cause all that???

and y would an older amp work fine but these new ones cut out???

if you think the relay's will help ill do that 2maro.....

i just rly am wiggn id like to run my jbl's but as of right now its not looking to good....

A relay might help, it really does sound like it is some sort of voltage problem, it might be that at a higher volume the deck can't put out enough power through the remote wire to turn on all the amps, I would recommend using a relay, either way you can get a relay for under 10 bucks at any autoparts store, so I would try that before going out and buying brand new amps

94 3000gt

18" Kicker Solo X

KX2500.1

2 KX350.4

8 JBL Coax Speakers

250A Mechman Alt

Posted
sounds like a shitty amp if you have seen 7 do the same thing how are the gains set

iv tried using all diff gain settings ....

mine are not even 1/2 on all of them and his is prob... around 1/4

i just dnt kno and i have contacted them thats why i sent off the other 2... but they say i havent ever heard of this problem... and this is unique????

and no im glad ur asking ?'s maybe ill get some help and get this going??

*2013 NEW BUILD*

12- 18" Crossfire XS v2's B pillar 4th order wall

4- Crossfire 8K mono blocks

40+ pro audio mids tweeters and horns

3- Singer alternator 400a external regulated alts

tons of audiotechnix wire

24- XS Power D1400's

-TEAM XS POWER-

-TEAM CROSSFIRE-

-TDH-

tdh.png

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Who's Online   0 Members, 0 Anonymous, 660 Guests (See full list)

    • There are no registered users currently online
×
×
  • Create New...