95_1500 Posted January 9, 2009 Report Share Posted January 9, 2009 Alright I have my two stock batts under the hood and powermaster d3100 in the rear. Everything 1/0 and soldered. My stinger volt meter gets its + input right at the input to the amplifier which is hooked up to the d3100. I was bumpin pretty good for about 20 min. never goin below around 12.5 and whenever there was no bass it would come back up to 14.2-14.5. Well after about 20 min i look down and see 12.2. I turn it down turn off the amps and drive home. Put it on a charger and its up to 13.2. Started the truck and the d3100 stays at 13.2 whereas everything under the hood is seeing 14.4. I checked both fuses from the front batt to the rear with a multimeter, checked all connections, checked for shorts. everything i could think of and cant figure it out. Its charging right now but ive gotta go back to the dorm tomorrow and am trying to get this fixed by then. Thanks Original Build http://www.stevemeadedesigns.com/board/index.php?showtopic=24095 Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.