IAMBUMP Posted February 21, 2009 Report Share Posted February 21, 2009 (edited) I've got a TCI parallel 4 link kit that needs some new bushings and sleeves, I emailed TCI and they are still able to get you those ends you just have to shoot em an email (will provide that address for you). Also I have a pair of firstone sleeve bags that I will let go, one has a slight rub but it still airs up and holds air. This one would probably need replacing, but a fine option for mock up. Lastly I have some below/behind bag mounts, so it's all the major stuff you need for a rear setup... link-> 55+ ship bags-> 40+ ship brackets-> 20+ ship _____________________ 115 total Will let everything go for 100+ ship or piece out seperately. All four link bars go together, both bags go together, all brackets go together. Edited February 21, 2009 by IAMBUMP If you've been doing something for 20 years, does that mean what you do it right??? __________________________________ Want: 2x Phoenix Gold RSD65CS Comp Amp Undecided AA Havoc AQ 1200 knu wiring set scew lugs for all connections Alpine IDA-X303 2v preout --this goes under the seat. Have: Alpine tape deck w/ Benzi Box and 6 disc changer Check out my Toyota build Link to comment Share on other sites More sharing options...
Recommended Posts