kryptonitewhite Posted February 25, 2009 Report Share Posted February 25, 2009 barely used, I have a single 2 ohm Fi IB3 18" and the opti loves 1 ohm and .5 ohm, 2 ohm not working for me $250 plus shipping. http://i248.photobucket.com/albums/gg178/kryptonitewhite/mix/DSC_0003 http://www.importtuner.com/reviews/p...er/system.html Quote: TEST RESULTS OUTPUT POWER @ 1%THD, 1KHZ, 14.4VOLTS MONO @ 4OHMS 770 WATTS MONO @ 2OHMS 1118 WATTS MONO @ 1OHM 1687 WATTS MONO @ 0.5OHM 1962 WATTS OUTPUT POWER @ 1%THD, 1KHZ, 12.5VOLTS MONO @ 4OHMS 673 WATTS MONO @ 2OHMS 988 WATTS MONO @ 1OHM 1406 WATTS MONO @ 0.5OHM 1635 WATTS DISTORTION AT RATED POWER, 1KHZ, 14.4VOLTS 0.14% @ IMPEDANCE INPUT SENSITIVITY 250MV TO 8VOLTS FREQUENCY RESPONSE ( + 1DB) 15HZ -130KHZ S/N RATIO (A WEIGHTED, BELOW CLIPPING, MIN GAIN) > 83DB SLEW RATE 6.5V/MSEC DAMPING FACTOR @ 100HZ, 4 OHMS 105 IDLE CURRENT 2.1AMPS MAXIMUM CURRENT CONSUMPTION, UNCLIPPED 117AMPS @ 1152WATTS EFFICIENCY AT 1/3RD POWER LOWEST IMPEDANCE 79% EFFICIENCY AT FULL POWER, 1%THD, LOWEST IMPEDANCE 85% CROSSOVER SLOPE 24DB/OCTAVE CROSSOVER RANGE, LOWPASS 48HZ - 155HZ SUBSONIC SLOPE 24DB/OCTAVE SUBSONIC RANGE, LOWPASS 14HZ - 56HZ LOW FREQUENCY BOOST +19DB @ 43HZ DIMENSIONS 19 1/8"L X 10"W X 2.5"H IB3 22" Link to comment Share on other sites More sharing options...
kryptonitewhite Posted February 26, 2009 Author Report Share Posted February 26, 2009 sold IB3 22" Link to comment Share on other sites More sharing options...
Recommended Posts