kryptonitewhite Posted March 10, 2009 Author Report Posted March 10, 2009 Maybe askin in the maxxonics section on here will yeild a better answer from someone that works on them. The 200watts or so that will be missin wont be that noticable either. i would really like a definite answer on actual hifonics power too, but most ppl say its a little over rated i guess my main concern is the lanzar want't nearly enough power for my IB3 18. I am hoping the BXI has just enough more... basically I had it figured out on the volume knob where I could listen for a long period of time VS where if I listened too long the sub would get a bit warm/stinky. At that same point I noticed going any louder wouldn't actually make the sub much louder... so i think it was clipping... and if I pushed it just a bit more again I could hear a little clipping. So guessing the sub wanted 200-400 more watts, if this hifon makes 200-400 more watts at 2 ohms as well, it should be perfect. Quote IB3 22"
kryptonitewhite Posted March 10, 2009 Author Report Posted March 10, 2009 Diminishing return applies with pretty much everything...sad but true ah compression Quote IB3 22"
fritosaregood Posted March 10, 2009 Report Posted March 10, 2009 i guess my main concern is the lanzar want't nearly enough power for my IB3 18. I am hoping the BXI has just enough more... basically I had it figured out on the volume knob where I could listen for a long period of time VS where if I listened too long the sub would get a bit warm/stinky. At that same point I noticed going any louder wouldn't actually make the sub much louder... so i think it was clipping... and if I pushed it just a bit more again I could hear a little clipping.So guessing the sub wanted 200-400 more watts, if this hifon makes 200-400 more watts at 2 ohms as well, it should be perfect. i only had a small 4 channel lanzar, but it got stolen and i got a 4 channel hifonics and it had so much more output. but now i have and alpine 5 channel that i like better Quote seller feedback: http://www.stevemeadedesigns.com/board/ind...showtopic=61719 http://www.stevemeadedesigns.com/board/ind...showtopic=68281 build log: http://www.stevemeadedesigns.com/board/index.php?showtopic=44800 Gf's build: http://www.stevemeadedesigns.com/board/topic/54346-kickergirls-camaro-new-box-pg-5/#entry753970
ChevyBoy Posted March 10, 2009 Report Posted March 10, 2009 It all depends on how they are designed dude...just how some of the t2ks make the same power at 2 and 1..... some t2k's make more power at 2 ohm than 1 ohm :tease: snafu already posted that the bench couldnt put out the power that the amp called for at 1 ohm. being 2 ohm is more efficient, its put out more power. if that bench could give the t2k more power, it wouldve done better at 1 ohm. Quote
kryptonitewhite Posted March 10, 2009 Author Report Posted March 10, 2009 I kind of browsed around cuz I thought I saw a thread once of bench tested amps... I can't find it again Quote IB3 22"
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.