Gazoo_bumpin Posted March 28, 2009 Report Share Posted March 28, 2009 Hi Car-1998 Olds Intrigue I Need to Replace the HighBeam/Signal Switch Do I need to remove the Tilt Arm to gain access to the Signal Switch or can the Bottom Shroud just slip off If I need to remove the Tilt Arm How??? Also Do I need to remove the Steering Wheel too you think Quote Moving where the Money Trees are Link to comment Share on other sites More sharing options...
PUNKYOU007 Posted March 28, 2009 Report Share Posted March 28, 2009 i dont know anything about that car, but you should spend $20 and get a chilton manual for your car. Quote Doethepaperboy "Bars of Pain" Doethepaperboy "Hero Remix" C. Arson d(-__-)b beer sucks...but i can bring some jose cuervo. Only problem is that it makes me horny and gives me the rams. So unless yall wanna fight and then have some great make up sex i will leave it home. Link to comment Share on other sites More sharing options...
CodyB Posted March 28, 2009 Report Share Posted March 28, 2009 Looks like you split it, There are a few screws probably torx head underneathe the column and it looks like it will split in half, you may be able to remove a set screw or just move the plastic around enough to slide it off the arm, or even just leave it hanging there and fiv the switch without removing it... Quote 88-98 GM Full Size Forum www.GMT400.com i put fuses on power wires, and condoms on fuses, to keep the fuses safe! Link to comment Share on other sites More sharing options...
ryde2idie Posted March 28, 2009 Report Share Posted March 28, 2009 (edited) once you take the srews out from the bottom of the steering column cover you pull the tilt arm down and let the steering column go up and that will allow you to rotate the bottom piece of the steering column cover to go around the tilt arms bends so you can take off the bottom piece of the steering column cover. Edited March 28, 2009 by ryde2idie Quote Quote Link to comment Share on other sites More sharing options...
Gazoo_bumpin Posted March 28, 2009 Author Report Share Posted March 28, 2009 once you take the srews out from the bottom of the steering column cover you pull the tilt arm down and let the steering column go up and that will allow you to rotate the bottom piece of the steering column cover to go around the tilt arms bends so you can take off the bottom piece of the steering column cover. Thanks I'm doing the job today Do I have to remove the Screws to get the top pieace off first Quote Moving where the Money Trees are Link to comment Share on other sites More sharing options...
ryde2idie Posted March 28, 2009 Report Share Posted March 28, 2009 yes without taking the screws from the bottom out the pieces will not come off Quote Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.