EricR Posted April 20, 2009 Report Posted April 20, 2009 started the box today for my 15" mayhem, gonna be powered by a saz 3000d. Inch and a half thick baffle screwed and glued with titebond ll mayhem 15" and heres a pic of my 20's got a chance to snap this today as well i was thinking leave the 12 sitting in the box in the hole and duck tape from the bottom of the sub to the bottom of the baffle so the sub doesnt free air. would that work?
BigPimpin91 Posted April 20, 2009 Report Posted April 20, 2009 Beefy Bastard. The sub too. BigPimpin91's Banging Music
FYI-Future-Star Posted April 20, 2009 Report Posted April 20, 2009 Someone wasn't watching a female in heat or someone breeds I breed APBTs too Oh nice work sofar can't wait to see it finished Team O.B.M '97 Tahoe Build after the new year!!! Kenwood kdc-x794/16gig android tablet 6 sets of Crescendo ccx65s 2 18s 2 Sundown saz 4500s 2 Sundown sax 100.4 1 Mechman SMD spec 360a 4 XS d1400s My Feed Back http://www.stevemead...showtopic=44841 ub
EricR Posted April 20, 2009 Author Report Posted April 20, 2009 no, someone was watching a female in heat i let them off their chains for a reason lol i was thinking leave the 12 sitting in the box in the hole and duck tape from the bottom of the sub to the bottom of the baffle so the sub doesnt free air. would that work?
EricR Posted April 21, 2009 Author Report Posted April 21, 2009 almost done now just gonna wait for all the glue to dry and im gonna sand it down and paint it tomorrow i was thinking leave the 12 sitting in the box in the hole and duck tape from the bottom of the sub to the bottom of the baffle so the sub doesnt free air. would that work?
brsteinbach Posted April 21, 2009 Report Posted April 21, 2009 Looks really nice! How wide is the port? 2 Infinity Reference 1252w 12s 4.2 cubic foot box tuned to 28hz Sub amp: 1 Profile AP1200 Speaker amp: 1 Sony Xplod XM-504z Kenwood eXcelon KDC-X492 4 and 8 Gauge Knu Big III In 1/0 All in my 90 Accord Diamonds are forever, but 9's end that shit fast....
EricR Posted April 21, 2009 Author Report Posted April 21, 2009 4.5 i was thinking leave the 12 sitting in the box in the hole and duck tape from the bottom of the sub to the bottom of the baffle so the sub doesnt free air. would that work?
EricR Posted April 22, 2009 Author Report Posted April 22, 2009 well its done just need to get some 8 gauge to put some terminals inside the box. it fits perfect too, slides all the way up to a metal lip where the back seats fold down and theres only about 2-3 inches on each side so i may seal it off from the trunk since it will be fairly easy but imma play around with it a little and see which is laouder. amp should be here thursday oh yeah this whole box was built only with a jig saw and a drill i was thinking leave the 12 sitting in the box in the hole and duck tape from the bottom of the sub to the bottom of the baffle so the sub doesnt free air. would that work?
brsteinbach Posted April 22, 2009 Report Posted April 22, 2009 Damn a jig with that straight of cuts! Good job bro. 2 Infinity Reference 1252w 12s 4.2 cubic foot box tuned to 28hz Sub amp: 1 Profile AP1200 Speaker amp: 1 Sony Xplod XM-504z Kenwood eXcelon KDC-X492 4 and 8 Gauge Knu Big III In 1/0 All in my 90 Accord Diamonds are forever, but 9's end that shit fast....
EricR Posted April 26, 2009 Author Report Posted April 26, 2009 sub is in and it bangs. i don't have a digital camera cause i have my iphone i take all my pics with so ill work on gettin some vids soon. i just ran some 12 gauge through the port untill i make some bolt terminals also need to do a few other things i was thinking leave the 12 sitting in the box in the hole and duck tape from the bottom of the sub to the bottom of the baffle so the sub doesnt free air. would that work?
Recommended Posts
Archived
This topic is now archived and is closed to further replies.