brsteinbach Posted April 30, 2009 Report Share Posted April 30, 2009 Do you have a DMM? If so check your voltage. This probably isnt the problem but, starters wont turn over under 10.5 volts. Like I said this probly aint the problem. Have you tried jumping it yet? I hope this gets worked out man. Quote 2 Infinity Reference 1252w 12s 4.2 cubic foot box tuned to 28hz Sub amp: 1 Profile AP1200 Speaker amp: 1 Sony Xplod XM-504z Kenwood eXcelon KDC-X492 4 and 8 Gauge Knu Big III In 1/0 All in my 90 Accord Diamonds are forever, but 9's end that shit fast.... Link to comment Share on other sites More sharing options...
loganuf Posted April 30, 2009 Author Report Share Posted April 30, 2009 I'd try pulling codes to see, if it won't start then you have no way of checking them without getting to autozone or a mechanic.... kind of an SOL situation unless you own an OBDI or II? I can't remember, either way. If the PCM is still functional it'll throw a few codes I'm sure. yea i dont know what those even are so i dont think i have them? but i appreciate the help Quote 2000 Eddie Bauer Expedition: Alpine CDA 9883 2x 18" DC lvl 4 D2 10.7 cu ft box 33hz knu 1/0 wire amp: Kicker ZX2500.1 Kinetik Link to comment Share on other sites More sharing options...
jonatan Posted April 30, 2009 Report Share Posted April 30, 2009 my dads expediton did the same thing had a guy from dealer bring his laptop and reprogram it and it started right up but his did crank Quote Kenwood Excelon DDX812 6.95" double din 4 lvl 4 xl 15" 4 RF 1500 2 RF 600.4 2 15-MC5 - Memphis 5.25" 2 Way MClass Coaxial Speakers 2 15-MC92 - Memphis 6 x 9" 2 Way MClass Coaxial Speakers 2 mc memphis tweeters memphis 16-EQP4 Signal Processors 4 2400 Kinetik 1 1800 Kinetik iraggi 300 http://www.stevemeadedesigns.com/board/ind...showtopic=42009 Link to comment Share on other sites More sharing options...
94dakotamtx12's Posted April 30, 2009 Report Share Posted April 30, 2009 Replace that fuse thats why it wont start replace the fuse also with a 10 instead of the 5. I did this in my dakota and it took care of the problem. Quote Jensen Uv8 Head unit 1 12" Mtx Thunder Svc 2 12" Jl Audio W3D4 Dvc (both bridged) 1 Sony Xplode 1000 watt. 1994 Ext cab Dodge Dakota My Daily ground pounder Link to comment Share on other sites More sharing options...
loganuf Posted April 30, 2009 Author Report Share Posted April 30, 2009 I have a 2002 expedition that won't start when you turn the key. doors and windows won't work but auxiliary power does, ie cell phone charger. no lights on dash and won't crank or anything. any ideas? this sound right??? kind of, except that some lights do come on for my dash, like the ABS light.....and door ajar light. Quote 2000 Eddie Bauer Expedition: Alpine CDA 9883 2x 18" DC lvl 4 D2 10.7 cu ft box 33hz knu 1/0 wire amp: Kicker ZX2500.1 Kinetik Link to comment Share on other sites More sharing options...
loganuf Posted April 30, 2009 Author Report Share Posted April 30, 2009 Replace that fuse thats why it wont start replace the fuse also with a 10 instead of the 5. I did this in my dakota and it took care of the problem. already tried that. this particular fuse that blew doesnt control starting the car, which is what baffles me Quote 2000 Eddie Bauer Expedition: Alpine CDA 9883 2x 18" DC lvl 4 D2 10.7 cu ft box 33hz knu 1/0 wire amp: Kicker ZX2500.1 Kinetik Link to comment Share on other sites More sharing options...
94dakotamtx12's Posted April 30, 2009 Report Share Posted April 30, 2009 IM also guessing your just have a strict knowledge of car audio and nothing to do with the motor Quote Jensen Uv8 Head unit 1 12" Mtx Thunder Svc 2 12" Jl Audio W3D4 Dvc (both bridged) 1 Sony Xplode 1000 watt. 1994 Ext cab Dodge Dakota My Daily ground pounder Link to comment Share on other sites More sharing options...
loganuf Posted April 30, 2009 Author Report Share Posted April 30, 2009 IM also guessing your just have a strict knowledge of car audio and nothing to do with the motor yea good call Quote 2000 Eddie Bauer Expedition: Alpine CDA 9883 2x 18" DC lvl 4 D2 10.7 cu ft box 33hz knu 1/0 wire amp: Kicker ZX2500.1 Kinetik Link to comment Share on other sites More sharing options...
RobClay Posted April 30, 2009 Report Share Posted April 30, 2009 (edited) Try reseting your car's computer. Undo the pos and neg on your battery for about 5 mins or longer. Edited, forgot about the pos too Edited April 30, 2009 by RobClay Quote 2 SSA Xcon 18's Sundown 2500D Pioneer 4 Stinger SPV35 batts SecondSkin Audio Damp Pro Knukonceptz Flex[/size][/b] Link to comment Share on other sites More sharing options...
94dakotamtx12's Posted April 30, 2009 Report Share Posted April 30, 2009 UNplug both negative and positive connections on the battery leave for 5 minutes than reconnect. Quote Jensen Uv8 Head unit 1 12" Mtx Thunder Svc 2 12" Jl Audio W3D4 Dvc (both bridged) 1 Sony Xplode 1000 watt. 1994 Ext cab Dodge Dakota My Daily ground pounder Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.