fritosaregood Posted May 8, 2009 Author Report Share Posted May 8, 2009 I had a few finals today so i didnt get much done. I got the top baffle on. i just using a single baffle because ill have threaded rod for bracing. I also sealed the edged with more fiberglass and made more 45's from resin. I didnt get to many pics of it since fiberglassin gets pretty messy. I also got some toys today..sorta ^^ wat i get for bein on ebay at 3am I found some 3in air sander disk things 25 for $20 nice deal, some rubber grommets. 150 with different sized i think it was $7. and 2 fuse blocks.. i ran into a problem with my alt to batt wire got laid on my header and came about a millimeter from melting throught the wire loom and wire jacket. so now i wanna fuse both ends just to be safe. Ill get a pic of wat the wire looks like. seller feedback: http://www.stevemeadedesigns.com/board/ind...showtopic=61719 http://www.stevemeadedesigns.com/board/ind...showtopic=68281 build log: http://www.stevemeadedesigns.com/board/index.php?showtopic=44800 Gf's build: http://www.stevemeadedesigns.com/board/topic/54346-kickergirls-camaro-new-box-pg-5/#entry753970 Link to comment Share on other sites More sharing options...
07sOnAtA sp.ed Posted May 8, 2009 Report Share Posted May 8, 2009 nice work so far. that port is sick as hell. finsh up them finals, so u can finish up that box CURRENTLY UNDER RE-CONSTRUCTION 2008 Hyundai Sonata Team T3 Audio Team Deadly Hertz Team SMD (Street Motivated Devastation) Link to comment Share on other sites More sharing options...
fritosaregood Posted May 8, 2009 Author Report Share Posted May 8, 2009 nice work so far. that port is sick as hell. finsh up them finals, so u can finish up that box I hope this will be done next week. i have a cal 2 final tomorrow, work all weekend then a heat transfer final monday. tuesday im off all day. hopefully ill get it the location in the car set by tuesday so i can measure for the daily port. Im gonna go with the longest port i can fit cuz i love to play 20~30 hz tones seller feedback: http://www.stevemeadedesigns.com/board/ind...showtopic=61719 http://www.stevemeadedesigns.com/board/ind...showtopic=68281 build log: http://www.stevemeadedesigns.com/board/index.php?showtopic=44800 Gf's build: http://www.stevemeadedesigns.com/board/topic/54346-kickergirls-camaro-new-box-pg-5/#entry753970 Link to comment Share on other sites More sharing options...
rumproast789 Posted May 8, 2009 Report Share Posted May 8, 2009 what kind of fuses and fuse holders are those? 2002 ford explorer 200 amp rewound alt single 18" Fi btl fully loaded 2 1750's 2 c&d tech 88amp/hr batts 2 ought wiring cdt component set up front, cdt coaxials in back Kenwood eXcelon KDC-X693 Link to comment Share on other sites More sharing options...
brewer_brewer Posted May 8, 2009 Report Share Posted May 8, 2009 damnit. i hate work internet. can't see any pictures. sure its good though, you got some skills. you going to the comp this month? i'm rebuilding my 12 to a 18 and going big on the box (hoping for 147-149, we'll see) but we'll have to meet up and check each other's rides out again. REFS http://www.caraudioclassifieds.org/forum/itrader.php?u=2026 http://www.stevemeadedesigns.com/board/topic/44535-official-brewer-brewer-feedback/page__p__625998__hl__brewer__fromsearch__1entry625998 "you're not allowing natural selection to work, you're like the guy that invented the seatbelt" Link to comment Share on other sites More sharing options...
fritosaregood Posted May 8, 2009 Author Report Share Posted May 8, 2009 what kind of fuses and fuse holders are those? its bullz audio(never heard of it).. im not gonna use the fuses, they were just free with it. I might not stick with the fuse blocks either, but i wanted to try that style to see if its easier to mount. ebay at 3 in the mornin leads to buyin lots of stuff. damnit. i hate work internet. can't see any pictures. sure its good though, you got some skills. you going to the comp this month? i'm rebuilding my 12 to a 18 and going big on the box (hoping for 147-149, we'll see) but we'll have to meet up and check each other's rides out again. thanks man, ill be at the comp with this box. hopefully ill have my alt back by then too. I got my oscope all figured out too. seller feedback: http://www.stevemeadedesigns.com/board/ind...showtopic=61719 http://www.stevemeadedesigns.com/board/ind...showtopic=68281 build log: http://www.stevemeadedesigns.com/board/index.php?showtopic=44800 Gf's build: http://www.stevemeadedesigns.com/board/topic/54346-kickergirls-camaro-new-box-pg-5/#entry753970 Link to comment Share on other sites More sharing options...
brewer_brewer Posted May 8, 2009 Report Share Posted May 8, 2009 nice. the comp is on the 20th or something like that right? i'm ready to see this thing man. i haven't seen anyone burbing a AP Axis yet so this should be interesting. REFS http://www.caraudioclassifieds.org/forum/itrader.php?u=2026 http://www.stevemeadedesigns.com/board/topic/44535-official-brewer-brewer-feedback/page__p__625998__hl__brewer__fromsearch__1entry625998 "you're not allowing natural selection to work, you're like the guy that invented the seatbelt" Link to comment Share on other sites More sharing options...
fritosaregood Posted May 8, 2009 Author Report Share Posted May 8, 2009 nice. the comp is on the 20th or something like that right? i'm ready to see this thing man. i haven't seen anyone burbing a AP Axis yet so this should be interesting. the 30th im pretty sure. somewhere in conway seller feedback: http://www.stevemeadedesigns.com/board/ind...showtopic=61719 http://www.stevemeadedesigns.com/board/ind...showtopic=68281 build log: http://www.stevemeadedesigns.com/board/index.php?showtopic=44800 Gf's build: http://www.stevemeadedesigns.com/board/topic/54346-kickergirls-camaro-new-box-pg-5/#entry753970 Link to comment Share on other sites More sharing options...
brewer_brewer Posted May 8, 2009 Report Share Posted May 8, 2009 the 30th im pretty sure. somewhere in conway yeah i think thats right. idk. i have the flyer in my room, i'll look tonight. what ohm load will you be pulling? REFS http://www.caraudioclassifieds.org/forum/itrader.php?u=2026 http://www.stevemeadedesigns.com/board/topic/44535-official-brewer-brewer-feedback/page__p__625998__hl__brewer__fromsearch__1entry625998 "you're not allowing natural selection to work, you're like the guy that invented the seatbelt" Link to comment Share on other sites More sharing options...
fritosaregood Posted May 8, 2009 Author Report Share Posted May 8, 2009 itll be at 1.1 on a dmm. hopefully with this bigger box my rise wont go up to 5 or so like the last comp. once i get the sub in ill get my impedence rise graphs. seller feedback: http://www.stevemeadedesigns.com/board/ind...showtopic=61719 http://www.stevemeadedesigns.com/board/ind...showtopic=68281 build log: http://www.stevemeadedesigns.com/board/index.php?showtopic=44800 Gf's build: http://www.stevemeadedesigns.com/board/topic/54346-kickergirls-camaro-new-box-pg-5/#entry753970 Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.