raiderhockey88 Posted May 7, 2009 Report Share Posted May 7, 2009 Is fatmat sound dampening any good???? Quote Link to comment Share on other sites More sharing options...
mrwigglezdj Posted May 7, 2009 Report Share Posted May 7, 2009 better than nothing, but its no second skin or dynomatt by anymeans but it does get the job done. hell im useing peel and stick and expandafoam in my van for deadner.... Quote Americas loudest work van2006 iasca heavyweight bassboxing champion at 150.4 db with 60second average TL8 memphis PR15s,12 memphis PR6.5's coax,4 memphis PR 1inch tweets Link to comment Share on other sites More sharing options...
white4d96 Posted May 7, 2009 Report Share Posted May 7, 2009 I have heard reports of fatmat peeling off in some cases, but I have also heard that if you install it properly and heatgun it to the surface that it won't be a problem. Quote Too many projects, too little time... Link to comment Share on other sites More sharing options...
thehoe92 Posted May 7, 2009 Report Share Posted May 7, 2009 clean the surface and it shouldn't peel. if I may recommend going to home depot and getting some peal and seal. its used for roofing and you get a bunch for cheap and it is essentially the same thing. Quote Wouldnt be thehoe92 without teh purple Link to comment Share on other sites More sharing options...
mrwigglezdj Posted May 7, 2009 Report Share Posted May 7, 2009 alot of people fail on installing because they dont properly clean the surface of dust dirt and grime. it does have to be clean or it will fall when it gets hot Quote Americas loudest work van2006 iasca heavyweight bassboxing champion at 150.4 db with 60second average TL8 memphis PR15s,12 memphis PR6.5's coax,4 memphis PR 1inch tweets Link to comment Share on other sites More sharing options...
zfrerichs Posted May 7, 2009 Report Share Posted May 7, 2009 its tar based if im not mistaken and like "peel and seal" i call it ice and water just use a heat gun when you put it on and it is better than nothing Quote Roseville, CA Link to comment Share on other sites More sharing options...
raiderhockey88 Posted May 7, 2009 Author Report Share Posted May 7, 2009 yeah its for the roof of my cherokee so i definetly want it to stick i was also checkin out edead is that a better way to go Quote Link to comment Share on other sites More sharing options...
00_XJ Posted May 7, 2009 Report Share Posted May 7, 2009 RAAMmat Quote 2000 Jeep Cherokee -DC Audio -Memphis -Audioque -SecondSkin -Pioneer -KnuKonceptz Link to comment Share on other sites More sharing options...
raiderhockey88 Posted May 7, 2009 Author Report Share Posted May 7, 2009 raamat might be my choice if nobody thinks edead is any better Quote Link to comment Share on other sites More sharing options...
mrwigglezdj Posted May 7, 2009 Report Share Posted May 7, 2009 i say peel n stick (water and ice) its not heavy so as long as you put it up properly and clean, it will stick and you will be good to go. i live in fla. where it gets hot in my van with no ac and i have yet to have any fall.. and its been there for 3+ years Quote Americas loudest work van2006 iasca heavyweight bassboxing champion at 150.4 db with 60second average TL8 memphis PR15s,12 memphis PR6.5's coax,4 memphis PR 1inch tweets Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.