New Box Help

[BEllithorpe04]

Hey guys, been around the forum for a little while but just layin low and lookin at builds and what not. I recently had an idea to do a cool looking design with my CVR's in separate boxes, all tuned the same and all the same specs, because i wanted the wrap around trunk look, and i was going to vinyl all of it and make it look nice. But then i got a new amp last week, a Crunch Groundpounder 1600.1 and mounted it on my fiberglass amp rack. The picture of the setup is my avatar picture. It changed the way it sounded for the better, and the flex was better because my old amp was about to die, but tuning sounded off and didnt hit the lows i wanted. I want to go with either a full trunk fiberglass shell, cut it in two, and have two separate fiberglass shells that meet together in the middle and look to be all the same thing, or go with a double baffled MDF box with a big port, and tune it to like 35-38 hertz. If i do the shell it will have to be in the summer, and if i do the MDF i could start this weekend, or do both lol then just take the MDF out and do the FG. If anyone could suggest some ideas for the box i would appreciate cuz as im writing this i figure i might as well do both lol thanks guys i really appreciate everything and seem to like this forum ALOT compared to others, mainly because there is a very small percentage of pricks on here and i think newbies need people to help not criticize. -Brian

[matt402]

did u adjust the gains and low-pass filter on your amp?

what are your available demensions (max size of box in trunk)?

i would suggest the one common chamber ported box.

[BEllithorpe04]

yeah i adjusted them but it still didnt hit the freq's i wanted it to

uhm i can do about a 32x32x15 maybe a little bit bigger but not much

i was thinking the same thing too with a bigger port, thanks for the quick reply