Kranny Posted June 4, 2009 Report Share Posted June 4, 2009 i did try one sub and nothing happened...it was working fine today with my old amp i just disconnected it and now nothing happens... are the subs blown Quote Link to comment Share on other sites More sharing options...
Jeep03 Posted June 4, 2009 Author Report Share Posted June 4, 2009 nope were working fine as i banged down my neighborhood to the front door of my house. Quote Link to comment Share on other sites More sharing options...
white4d96 Posted June 4, 2009 Report Share Posted June 4, 2009 (edited) I would say try switching the negatives on the speaker outs, just for the hell of it. See if that works. EDIT: BUT ASK OTHER PEOPLE FIRST! I DON'T HAVE EXPERIENCE WITH THIS AMP! [/disclaimer] Edited June 4, 2009 by ktownsdriftking Quote Too many projects, too little time... Link to comment Share on other sites More sharing options...
Jeep03 Posted June 4, 2009 Author Report Share Posted June 4, 2009 what ima do is hook my old amp back up and see what happens. if it works then i will be pissed. Quote Link to comment Share on other sites More sharing options...
Jeep03 Posted June 4, 2009 Author Report Share Posted June 4, 2009 but look at the manual. do i need 2 rca connections with a y adapter for the input.. this thing is confuseing Quote Link to comment Share on other sites More sharing options...
Kranny Posted June 4, 2009 Report Share Posted June 4, 2009 but look at the manual. do i need 2 rca connections with a y adapter for the input.. this thing is confuseing some headunits have a mono subwoofer output, thats what the Y splitter would be used for. Quote Link to comment Share on other sites More sharing options...
Jeep03 Posted June 4, 2009 Author Report Share Posted June 4, 2009 well its ot the rca cables i took the headunit out and it says output and my cables are connected at output? i will till tomorrow morning when everything clears up its raining and shit so ill just hold off till tomorrow... Quote Link to comment Share on other sites More sharing options...
bennett15 Posted June 4, 2009 Report Share Posted June 4, 2009 sometimes with the hifonics amp if the remote line is not tighten all the way or some of the insulation is touching the remote hold down down screw they wont work i know it has nothing to do with sub output but my buddy has one and thats what was happening. Also make sure impendce is correct or you will burn up the speaker out put like i did my with 1608 Quote 98 Dodge Durango 12 000K 50/55W Headlights 12 000K 35W Fog lights HU Panasonic CQ-VX100 7" Reciever (1) Fi SSD 18" Fully Loaded (1) Ported box 33hz (1) Soundstream TRX1500D (1) Soundstream TRX2.440 (1) RE 6.5" Component Set (1) Rear battery Big 3 in 0/1 gauge 2 runs of 1/0 Gauge wire 250A Alt soon.. Link to comment Share on other sites More sharing options...
mr.wattz(405) Posted June 4, 2009 Report Share Posted June 4, 2009 did u check ur ground make sure its good and the wire isn't shot. i had the same problem awhile back hooking up a friend system. my buddy blew a solo baric in the ride and we put 2 rockfords in there with a new amp on the old wires. well we got power but no sound, come to find out the ground was bad the whole time so test ur ground check it out and see if that might be ur problem Quote Link to comment Share on other sites More sharing options...
Jeep03 Posted June 4, 2009 Author Report Share Posted June 4, 2009 well, i hooked up my old amp to it and one sub came on. only because i connected one sub. so i pulled it out of the box and the subs were connected still they diddnt vibrate off or anything. so then i hooked the hifonics amp directly to the sub without the box and nothing came on. after that i hooked up my kenwood amp directly to my sub and it came on. what now... Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.