Kvo_8 Posted June 17, 2009 Report Share Posted June 17, 2009 So i ordered this clarion flip out like a month ago and it came with the wrong stereo harness, so I've been waiting for clarion to send me the correct harness, I finally got it in today. But as I was hooking it up, I found out that I have no idea where I should hook the grass green (parking brake cord) and the purple/white (reverse gear cord) to...Its going in a 97 camry, any help would be appreciated Alpine 9886 Polk Audio 6.5 Component db series Elemental Designs nine.4 JL Audio 1000/1 DC Lvl 4 15" - 3.95 cu ft/tuned to 32 hz Clarion EQS746 Stinger Voltage Meter Optima Yellow Top (Front) XS Power 1200 (Rear) All KnuKonceptz Wiring Link to comment Share on other sites More sharing options...
Kvo_8 Posted June 17, 2009 Author Report Share Posted June 17, 2009 i figured out the parking brake wire, ended up hooking it to a toggle switch but i ran into a host of other problems..i hooked up my 4 channel amp and my monoblock but only my rear 6x9s are working, no subs or component set..also i have a hard time getting the HU to bolt into the car, its kind of just sitting there right now..any suggestions for any of the problems? Alpine 9886 Polk Audio 6.5 Component db series Elemental Designs nine.4 JL Audio 1000/1 DC Lvl 4 15" - 3.95 cu ft/tuned to 32 hz Clarion EQS746 Stinger Voltage Meter Optima Yellow Top (Front) XS Power 1200 (Rear) All KnuKonceptz Wiring Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.