Kandrew279 Posted July 16, 2009 Report Share Posted July 16, 2009 does anyone want drawings? I can draw some enclosures for anyone if u'd like. here's a quick one for an example. it also includes all the dimensions for all the pieces. i can do colors and pictures as well another quick example Quote Link to comment Share on other sites More sharing options...
Got_Bass89 Posted July 16, 2009 Report Share Posted July 16, 2009 (edited) Ya I would like one... 35L 46W 21H Top and back baffles 1.5" Sides, Back, Bottom All 1" Port pieces 3/4" Port 10" x 18.5" and 21" long in middle of subs off back glass Port goes all the way down like pictured but over 1" too.. 10" from bottom of course.. All roundover if you can do that too. Example http://i40.photobucket.com/albums/e216/saxwonder05/Joey2.png Edited July 16, 2009 by Got_Bass89 Quote Passport Build Here Alarm: Prestige APS997A 2-Way/Remote Start HeadUnit: Pioneer DEH-P6000UB Front Battery: Yellowtop Optima D34/78 Back Battery: 2x C&D Technologies High Rate Series UPS12-475FR 134AH Subs: 2x DC Lv4XL 18's Amps: 2x Sundown Saz1500's Strapped Box: 12Cubes 33hz 185sqin Port(15.4sqin per cube) Pillars: AudioBahn AS31Q Front Doors: Clif Designs TX40.5 Back Doors: Clif Designs CD50.4C Rear Speakers: Clif Designs TX46.5 Front/Rear Amp: Kicker ZX350.4 Back/Pillars Amp: Kicker ZX200.2(Looking for another zx350.4) Electrical: 1/0 Scorpion Wire 2 Runs Pos and 2Runs Ground, Knu 1/0 Flex Running to Amps ect, Big 3, JL 8Ga For Speaker Wire, Knu Karma RCA's, Scorpion Volt Meter Deadener: 100 sqft Sound Destroyer Mat And SECOND SKIN Damplifier Pro Door Pack Link to comment Share on other sites More sharing options...
Kandrew279 Posted July 16, 2009 Author Report Share Posted July 16, 2009 (edited) Ya I would like one...35L 46W 21H Top and back baffles 1.5" Sides, Back, Bottom All 1" Port pieces 3/4" Port 10" x 18.5" and 21" long in middle of subs off back glass Port goes all the way down like pictured but over 1" too.. 10" from bottom of course.. All roundover if you can do that too. Example http://i40.photobucket.com/albums/e216/saxwonder05/Joey2.png ok lets see how this works out, i saved a drawing as a pdf and uploaded it. http://www.mediafire.com/?omddtymy5on I'm not quite sure which pieces were supposed to be which thicknesses... This entire box was made as one part, once i get it final i can draw up each piece too. I didn't know what pieces were what (back, top, bottom) Edited July 16, 2009 by Kandrew279 Quote Link to comment Share on other sites More sharing options...
Noobtastic14 Posted July 16, 2009 Report Share Posted July 16, 2009 what are you changing between the Sketchup and the CAD? -Drew Quote I am a United States Military Arts and Crafts Professional. Sand it off, Paint it on. uhoh_45 said: dont be a pussy P give the jeep to drew Link to comment Share on other sites More sharing options...
Got_Bass89 Posted July 16, 2009 Report Share Posted July 16, 2009 Everything... Size of wood, box, port... Just figured a CAD would be cool sense nobody else is lol Quote Passport Build Here Alarm: Prestige APS997A 2-Way/Remote Start HeadUnit: Pioneer DEH-P6000UB Front Battery: Yellowtop Optima D34/78 Back Battery: 2x C&D Technologies High Rate Series UPS12-475FR 134AH Subs: 2x DC Lv4XL 18's Amps: 2x Sundown Saz1500's Strapped Box: 12Cubes 33hz 185sqin Port(15.4sqin per cube) Pillars: AudioBahn AS31Q Front Doors: Clif Designs TX40.5 Back Doors: Clif Designs CD50.4C Rear Speakers: Clif Designs TX46.5 Front/Rear Amp: Kicker ZX350.4 Back/Pillars Amp: Kicker ZX200.2(Looking for another zx350.4) Electrical: 1/0 Scorpion Wire 2 Runs Pos and 2Runs Ground, Knu 1/0 Flex Running to Amps ect, Big 3, JL 8Ga For Speaker Wire, Knu Karma RCA's, Scorpion Volt Meter Deadener: 100 sqft Sound Destroyer Mat And SECOND SKIN Damplifier Pro Door Pack Link to comment Share on other sites More sharing options...
Kandrew279 Posted July 16, 2009 Author Report Share Posted July 16, 2009 what are you changing between the Sketchup and the CAD?-Drew what am i changing where? the 3-D model view is the same as the 2-D orthographic projection view. I can build the box in 3d, and since most people don't have 3d printers, it can make 2d prints to build from. Quote Link to comment Share on other sites More sharing options...
Got_Bass89 Posted July 16, 2009 Report Share Posted July 16, 2009 That site had hella pop up's even 2 got threw my blocker Quote Passport Build Here Alarm: Prestige APS997A 2-Way/Remote Start HeadUnit: Pioneer DEH-P6000UB Front Battery: Yellowtop Optima D34/78 Back Battery: 2x C&D Technologies High Rate Series UPS12-475FR 134AH Subs: 2x DC Lv4XL 18's Amps: 2x Sundown Saz1500's Strapped Box: 12Cubes 33hz 185sqin Port(15.4sqin per cube) Pillars: AudioBahn AS31Q Front Doors: Clif Designs TX40.5 Back Doors: Clif Designs CD50.4C Rear Speakers: Clif Designs TX46.5 Front/Rear Amp: Kicker ZX350.4 Back/Pillars Amp: Kicker ZX200.2(Looking for another zx350.4) Electrical: 1/0 Scorpion Wire 2 Runs Pos and 2Runs Ground, Knu 1/0 Flex Running to Amps ect, Big 3, JL 8Ga For Speaker Wire, Knu Karma RCA's, Scorpion Volt Meter Deadener: 100 sqft Sound Destroyer Mat And SECOND SKIN Damplifier Pro Door Pack Link to comment Share on other sites More sharing options...
Got_Bass89 Posted July 16, 2009 Report Share Posted July 16, 2009 Can you do a draw up like your first post pics? Quote Passport Build Here Alarm: Prestige APS997A 2-Way/Remote Start HeadUnit: Pioneer DEH-P6000UB Front Battery: Yellowtop Optima D34/78 Back Battery: 2x C&D Technologies High Rate Series UPS12-475FR 134AH Subs: 2x DC Lv4XL 18's Amps: 2x Sundown Saz1500's Strapped Box: 12Cubes 33hz 185sqin Port(15.4sqin per cube) Pillars: AudioBahn AS31Q Front Doors: Clif Designs TX40.5 Back Doors: Clif Designs CD50.4C Rear Speakers: Clif Designs TX46.5 Front/Rear Amp: Kicker ZX350.4 Back/Pillars Amp: Kicker ZX200.2(Looking for another zx350.4) Electrical: 1/0 Scorpion Wire 2 Runs Pos and 2Runs Ground, Knu 1/0 Flex Running to Amps ect, Big 3, JL 8Ga For Speaker Wire, Knu Karma RCA's, Scorpion Volt Meter Deadener: 100 sqft Sound Destroyer Mat And SECOND SKIN Damplifier Pro Door Pack Link to comment Share on other sites More sharing options...
Kandrew279 Posted July 16, 2009 Author Report Share Posted July 16, 2009 (edited) Can you do a draw up like your first post pics? http://www.mediafire.com/?sharekey=1168fff...95965eaa7bc68bc there's the folder, i put a screen cap of it in the 3d modeling mode, with a bit of color of course! here's something better yet http://usa.autodesk.com/adsk/servlet/index...LC-GN9219645015 u can download that for free, and u can download a .dwf (im about to upload) and u can look at the box from any angle! Edited July 16, 2009 by Kandrew279 Quote Link to comment Share on other sites More sharing options...
Got_Bass89 Posted July 16, 2009 Report Share Posted July 16, 2009 Couldn't DL program but pic looks good.. Might have to paint my port red after seeing that now Quote Passport Build Here Alarm: Prestige APS997A 2-Way/Remote Start HeadUnit: Pioneer DEH-P6000UB Front Battery: Yellowtop Optima D34/78 Back Battery: 2x C&D Technologies High Rate Series UPS12-475FR 134AH Subs: 2x DC Lv4XL 18's Amps: 2x Sundown Saz1500's Strapped Box: 12Cubes 33hz 185sqin Port(15.4sqin per cube) Pillars: AudioBahn AS31Q Front Doors: Clif Designs TX40.5 Back Doors: Clif Designs CD50.4C Rear Speakers: Clif Designs TX46.5 Front/Rear Amp: Kicker ZX350.4 Back/Pillars Amp: Kicker ZX200.2(Looking for another zx350.4) Electrical: 1/0 Scorpion Wire 2 Runs Pos and 2Runs Ground, Knu 1/0 Flex Running to Amps ect, Big 3, JL 8Ga For Speaker Wire, Knu Karma RCA's, Scorpion Volt Meter Deadener: 100 sqft Sound Destroyer Mat And SECOND SKIN Damplifier Pro Door Pack Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.