pmpnu2 Posted July 16, 2009 Report Share Posted July 16, 2009 The secondskin dampner pro is awsome its super sticky and very flexible. I used the door pack i won then immediatly ordered a bulk pack and will probably order another in the next couple weeks to finish deadning the entire trucks inside. here's a before and after vid I posted them in the vids section but ohh well double post on my part before after Thanks again ANT i used the fatmat and it was ok, it just seemed hard to work with. it made it a lil easier when i broke out the heat gun. maybe everyone on here just makes it look easy to apply... 2001 chevy blazer xtreme my blazer xtreme build On top of all that, my little sister is marrying a real fuckin winner tomorrow I've gotten that much wood just viewing this thread. Link to comment Share on other sites More sharing options...
swervinburban Posted July 16, 2009 Author Report Share Posted July 16, 2009 Thats all the pics I have for today but I will have more tomorrow. Hopefully my bulk pack of secondskin dampner pro will come in early enough for me to install it before I go to work but if not that will be friday's install, but I will still have more pics tomorrow I got alot of work to do. I got to add second balffel to box, resin in 45's, add allthread for more bracing, and fiberglass the inside of it. So im starting on that tomorrow!! I'll keep you'll updated Under construction soon to be: 2 DD Z9518's 8 lunar L1500's (500rms each) Secondskin Dampner pro 250a Mechman rhino alt 4 runs of 2/0 (installed) 4 batteries (installed) 6-5 1/4's, 2-6 1/2's, 2-4in all ma audio (installed) Link to comment Share on other sites More sharing options...
swervinburban Posted July 16, 2009 Author Report Share Posted July 16, 2009 i used the fatmat and it was ok, it just seemed hard to work with. it made it a lil easier when i broke out the heat gun. maybe everyone on here just makes it look easy to apply... That wasn't a problem with secondskin it was actually to sticky I had to put it in the frige just to get the paper backing off. I used the wooden roller ant supplied and went to work and this was my first time installing deadner and it went smooth as could be!! Under construction soon to be: 2 DD Z9518's 8 lunar L1500's (500rms each) Secondskin Dampner pro 250a Mechman rhino alt 4 runs of 2/0 (installed) 4 batteries (installed) 6-5 1/4's, 2-6 1/2's, 2-4in all ma audio (installed) Link to comment Share on other sites More sharing options...
lukaQ Posted July 16, 2009 Report Share Posted July 16, 2009 wow now that is what I call reinforced roof Got carbon fiber dust cap??? Link to comment Share on other sites More sharing options...
swervinburban Posted July 16, 2009 Author Report Share Posted July 16, 2009 wow now that is what I call reinforced roof LOL yeah I added 40 feet of aluminum its solid as a rock now. I'm tring to squeeze out every tenth of a db I can out of the lil truck this go round Under construction soon to be: 2 DD Z9518's 8 lunar L1500's (500rms each) Secondskin Dampner pro 250a Mechman rhino alt 4 runs of 2/0 (installed) 4 batteries (installed) 6-5 1/4's, 2-6 1/2's, 2-4in all ma audio (installed) Link to comment Share on other sites More sharing options...
Kasey Posted July 16, 2009 Report Share Posted July 16, 2009 LOL yeah I added 40 feet of aluminum its solid as a rock now. I'm tring to squeeze out every tenth of a db I can out of the lil truck this go roundHope you don't mind if i steal this idea for my truck. "Audio is not a hobby it's a lifestyle" _____________________________Refs_1_Refs_2_____________________________ Link to comment Share on other sites More sharing options...
swervinburban Posted July 16, 2009 Author Report Share Posted July 16, 2009 go ahead on I used 1 in by 1/8 thick aluminum. I put double stick tape to hold it in place, then perminently locked it down with polyuritane( i hope i spelled that right) Its the same stuff they use to glue in windshields. Once it dries it aint comming off. I'll take a pic of what I used to glue them in with tomorrow for you. Under construction soon to be: 2 DD Z9518's 8 lunar L1500's (500rms each) Secondskin Dampner pro 250a Mechman rhino alt 4 runs of 2/0 (installed) 4 batteries (installed) 6-5 1/4's, 2-6 1/2's, 2-4in all ma audio (installed) Link to comment Share on other sites More sharing options...
uluahunta808 Posted July 16, 2009 Report Share Posted July 16, 2009 damn thats a huge diff with secc. snk looks good man Link to comment Share on other sites More sharing options...
swervinburban Posted July 16, 2009 Author Report Share Posted July 16, 2009 Got a lil more work done today. I dropped of my glass template to the glass plant to get my new glass cut it should be ready for tomorrow. Tony cut my second baffel this morning, and I stripped all of that old ass tint off my truck today. I think that tint been on there since 97 it was a Bia Bia to take it off. Secondskin dampner pro bulk pack came in but I sent it to my moms house just to make sure someone would be there when it comes and didn't have time to pass over there. I'm usually busy during the day and I work in the afternoons tell night so its at my mom safe and sound tell tomorrow LOL here's a few picks from todays work here's the old ass tint that came with the truck when I bought it a few years ago. Its so old its purple LOL now here's it with it stripped off the back glass still has tint on it but I getting a new one made that better suites the demands of the system LOL!! I'll have more pics for you'll tomorrow I will be installing dampner pro bulk pack and start adding 45's to my box, hopefully picking up new rear glass if it ready, and what ever else I have time to do before I go to work. And tony thanks for all your help Under construction soon to be: 2 DD Z9518's 8 lunar L1500's (500rms each) Secondskin Dampner pro 250a Mechman rhino alt 4 runs of 2/0 (installed) 4 batteries (installed) 6-5 1/4's, 2-6 1/2's, 2-4in all ma audio (installed) Link to comment Share on other sites More sharing options...
swervinburban Posted July 16, 2009 Author Report Share Posted July 16, 2009 Hey can anyone give me another good fourm for me to join I have to post my secondskin dampner pro install on another board. It was one of the rules to the contest for the door pack give away, so I want to obide by them. I really don't know any other boards this was the first one I joined and never had any reason to go on others. SMD FTW!! Under construction soon to be: 2 DD Z9518's 8 lunar L1500's (500rms each) Secondskin Dampner pro 250a Mechman rhino alt 4 runs of 2/0 (installed) 4 batteries (installed) 6-5 1/4's, 2-6 1/2's, 2-4in all ma audio (installed) Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.