SmokeyDog Posted September 10, 2009 Report Posted September 10, 2009 going to be building a new sub box. makeing sure i have all the details covered before i even buy the wood. want to go over every aspict. got 3 options in mind, want to keep back seat! dont care if i have a trunk or not. kicker 12 cvr 2 ohm dual two kicker 750.1 amps. right now thats make for the electrical system. 2.25 feet port each sub car is a 06 sebring. 1 big box 38 wide 35 deep 15 high with a sq port 10x10x20 subs facing up, port facing in to car.(seats fold down) will have to do some cutting to get box in, and the only way would be to take the seats all out and slide in from front of car, makeing box for the most part in the cab. not worrie bout that. ill get in in the trunk 2 box for two subs ported , and a sparetire encloser ported. dont know how i would do this. 3 same demtions as 1 but diffrent port fireing thought the rear deck. dont know how to figure the port on this, dont know how to face subs or even where to put them or make a wall but i dont know how i would make 4 12s fit any ideas for me would be greatly appreacated. on the subs fireing up port forwared does this work? ~2006 chrysler Sebring~ ~2 runs of 1/0 front to back~ ~1/0 wire for "big 3"~ ------------------------------------------------------- 4 spl-hx 12'' dual 2 2 dtr 1.3400 3 c&d terminologies 1000s 100 aH Each piccso 6.5 comps pinoeer avh 4900dvd pioneer xm box blue gauges custom dave the box guys box ------------------------------------------------------------------------------ new stuff on the way Team Soundstream
Recommended Posts
Archived
This topic is now archived and is closed to further replies.