SmokeyDog Posted September 13, 2009 Report Posted September 13, 2009 dose a port have to be all in the box, or can it stick out of the box.? going to port though the rear deck between the the 6x9s. but theres a 4 to 5 inch gap between the deck and the top of the box ~2006 chrysler Sebring~ ~2 runs of 1/0 front to back~ ~1/0 wire for "big 3"~ ------------------------------------------------------- 4 spl-hx 12'' dual 2 2 dtr 1.3400 3 c&d terminologies 1000s 100 aH Each piccso 6.5 comps pinoeer avh 4900dvd pioneer xm box blue gauges custom dave the box guys box ------------------------------------------------------------------------------ new stuff on the way Team Soundstream
raytard Posted September 13, 2009 Report Posted September 13, 2009 it does not have to be all in the box, some people even run them entirely out of the box, just make sure you calculate all your volumes correctly Build: http://www.stevemeadedesigns.com/board/ind...hl=avalon+build monster/rockford/kicker/stinger cables, pioneer source, jbl highs/amps, kinetik/shuriken batts, iraggi alt, dei security, dc subs(atleast for now) Team DC
SmokeyDog Posted September 13, 2009 Author Report Posted September 13, 2009 it does not have to be all in the box, some people even run them entirely out of the box, just make sure you calculate all your volumes correctly the part thats in the box do i just add up the h l w and get the cubes in the box for the displace ment ~2006 chrysler Sebring~ ~2 runs of 1/0 front to back~ ~1/0 wire for "big 3"~ ------------------------------------------------------- 4 spl-hx 12'' dual 2 2 dtr 1.3400 3 c&d terminologies 1000s 100 aH Each piccso 6.5 comps pinoeer avh 4900dvd pioneer xm box blue gauges custom dave the box guys box ------------------------------------------------------------------------------ new stuff on the way Team Soundstream
Recommended Posts
Archived
This topic is now archived and is closed to further replies.