Nic Posted October 9, 2009 Report Share Posted October 9, 2009 your on one of the best forums for tutorials for building stuff.... the Qlogic kick panels are made for your car... simple to install.... add those 4" coaxels to the doors and 1 set of those punch components to the kick panels other in the back and your set... nice and simple Quote Full eclipse system is next on list.. soon to gut and redo the honda as new project/rolling buissness card i miss the sound of those old school strokers on beast amps Link to comment Share on other sites More sharing options...
drumminian Posted October 9, 2009 Author Report Share Posted October 9, 2009 they don't make them for my car so im SOL on the kick panels lol but thanks for the help man I'klll most likely go with what you suggested Dremel tool>metalIf you have a dremel, and a steady hand it takes MAYBE 15 minutes a door to cut a bigger hole. The main thing is to make sure you have clearance with the window down. Even if you are 1/2 inch short on clearance, you can buy/make a spacer. Don't have much clearance maybe 2.5-3.5 inches to the window...my dremels layin around here somewhere but idk if i want to getthat serious with this car kinda wanna sell it in a few months and upgrade to somethin with more room in the back for more subs which would mean putting the stock speakers in later :tease: Quote Alpine CDA-9887 15" FI BL JBL BP1200.1 Rockford Fosgate p142 4" front Rockford Fosgate p1S652 6.5" rear Optima D35 yellow top under hood Big 3 all in a 1997 Toyota Tercel Link to comment Share on other sites More sharing options...
Nic Posted October 10, 2009 Report Share Posted October 10, 2009 kick panels are easy to make and you can use all scrap to make them for the most part... go to HD or lowes get some bondo fiberglass and practice... plenty of threads on them on here... Quote Full eclipse system is next on list.. soon to gut and redo the honda as new project/rolling buissness card i miss the sound of those old school strokers on beast amps Link to comment Share on other sites More sharing options...
Carlos Tj Posted October 11, 2009 Report Share Posted October 11, 2009 i would go with CDT u cant go wrong... Quote 2005 Dodge Magnum Kenwood DNX573S Double Din NVX Big 3 Kit NVX 0 Gauge Cable & speaker cable XS Power V3100 Battery Iraggi Alternator 320A 3.5" NVX Speakers 6.5" Incriminator Audio Components (just mids) 6x9" NVX Speaker MVPA4 Amplifier (2) 12" NVX VCW Subwoofers XPLD3K NVX Amplifier YouTube Channel @CarlosTj664 Link to comment Share on other sites More sharing options...
tacomabanga1986 Posted October 11, 2009 Report Share Posted October 11, 2009 (edited) i unno but if ur door has a pocket u could take off the door pannel n remove the plastic pocket n cut a board the exact size n then fiberglass a 6&1/2 in there like i did in my geo, im a noob at fiberglassing but i think i did a halfway decent job my geo had 4'' speakers in dash so i modded it n put 6&1/2's in doors heres some pics its not that hard to do imo Edited October 11, 2009 by tacomabanga1986 Quote here's a link to my system 99 toyota tacoma , 2 mtx 8000 1504's in a sealed downfire , 1000w memphis amp here's a link to my other system my 90 geo prizm test car heres a thread i got of new songs u can dl that are legal = Some Good Bangage/you Can Dl These Free And Legit Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.