Inside a Aero Port box, Do it just build a box and cut 2 holes?

[BassBoy69]

So it seems aero ported boxes are pretty loud and maybe easier to dial in, idk just what i have heard

do i just build a box and cut to holes in it, and add the aeros inside or what..

i want to build a box for my audioque hdc3 - 12"

[kentb]

So it seems aero ported boxes are pretty loud and maybe easier to dial in, idk just what i have heard

do i just build a box and cut to holes in it, and add the aeros inside or what..

i want to build a box for my audioque hdc3 - 12"

pretty much, wayy easier to build than a slot ported box because you don't have to worry about making the port beautiful.

you can add the aeros inside or outside, whatever you want. you can also roundover the edges on the circle cutout on the wood.

[BassBoy69]

pretty much, wayy easier to build than a slot ported box because you don't have to worry about making the port beautiful.

you can add the aeros inside or outside, whatever you want. you can also roundover the edges on the circle cutout on the wood.

Well my current set up is this, its way to small, but good.

I just dont know what to do.

ANY IDEALS ON WHAT I SHOULD DO?

[BassBoy69]

So do I just build a box big enough and the have a port or 2 shooting out on the side, and cut that to lenth ?

[Mikesmith0890]

anyway to port it through your rear seat?

[BassBoy69]

anyway to port it through your rear seat?

ok well I normal keep the back seat out, seems to help alot, I have thick leather seats, the back rest pops off, and I put it back in for car shows.

[BassBoy69]

I can only use a drop in box this box is 18w 14d 14 tall = no room

the car has the X bracing keeping me from pushing a box inside from the back seat area

[fox_racin4]

my car hs the bracing behing the rear seat as well.... cut that out!! i didnt need it and i could fit a HUGE box in threw rear seat

[BassBoy69]

my car hs the bracing behing the rear seat as well.... cut that out!! i didnt need it and i could fit a HUGE box in threw rear seat

eclipse spyders do not have under body sway bars like hard tops. so the x bar acts as a sway bar to prevent body roll.

If i cut it out it will handle like crap i bet

[treossi]

if the seats fold down best way in my opinion is subs forward port forward on drivers side... but you have to seal everything off around the box