the mange Posted December 11, 2009 Report Share Posted December 11, 2009 I have a ski port with a latch/door that folds down into the trunk to allow air to flow through. If its ported through the hatch, and otherwise sealed off from the cabin, would that yield higher spl would it be a waste of time/money? Im not looking for pure spl, I just thought this might let me keep my sq but make it a little louder. My current setup is a regular 2.5 cube box with a bunch of room around the top/side to get around to the back of the box and through the ski port. Here's my idea(s)..... And sorry that it looks like a third grader made these sketches.. its all i could do with ms paint.... I would take real pictures but im at college till next week side view of trunk shape with ski port door open/folded down looking at the trunk from the outside top down view of new box design my attempt at an isometric view of the box..... (note this sketch doesnt have the 45 pieces in the port) I would adjust the width of the port to try and get ~30 hz with ~2.5 cubes after displacements Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.