siucsaluki11 Posted December 13, 2009 Report Share Posted December 13, 2009 Port is Way too small. My box that was about 4.75-4.8 cubes had 60 in^2 of port. Youre at 6.2 cubes with 40 in ^2. Quote woman..cant live with em...cant shoot em...guess were all fucked You might be a Redneck if you use your leftover gutters for a speaker box port... YOU JUST LOST THE GAMER.I.P. Blazer=========================Last setup was in the 141s on music (37hz) with 2 12s and 1kw in a 4dr blazer.2010 Mitsubishi Lancer DE2 12in Clarions (kept from blazer)HiFonics BRZ1700.1d (at 2 ohms BLOWN) [JBL GTS180X for subs currently 60wRMS x2ch!!!!!! This works for till i get the blown amp fixed] Alpine 4ch salvaged from blazer (currently near death)9887 peerless 7s in the doors and CDT tweeters ran active no speakers in the rearKintik HC1400 under the hood.metered once a while ago, dont remember it...was piss poor compared to the blazer, mid 130s i think....looking to replace subs and amp when i have money. Link to comment Share on other sites More sharing options...
herbykw Posted December 13, 2009 Author Report Share Posted December 13, 2009 Port is Way too small. My box that was about 4.75-4.8 cubes had 60 in^2 of port. Youre at 6.2 cubes with 40 in ^2. accordin to 12volt.com a box 6.2 cubes with a port 4" by 10" and 8.9" deep would be tuned to 35 hertz Quote 06 300C 5.7 Hemi K&N CAI JVC KW-AVX640 6.1" DVD DC Audio 3.5k 6 DC Audio 8"s 6 cubes 8" aero port at 32hrtz http://www.stevemeadedesigns.com/board/topic/183798-chrysler-300c-8-build/?p=2731834#entry2731834 Link to comment Share on other sites More sharing options...
Steph3n1 Posted December 13, 2009 Report Share Posted December 13, 2009 accordin to 12volt.com a box 6.2 cubes with a port 4" by 10" and 8.9" deep would be tuned to 35 hertz yea but you want to go by what kind of port area and box specs that specific sub likes Quote 2005 Ford Ranger Reg cab Build in Progress T3 Audio T2000 12 ARC SE4000 Stinger HPM 1/0 Wire DC power 270xp Batts: 1 Redtop up front and a Stinger SPP2250 in the back Hopes to be in and around a 150....weel see my youtube channel http://www.youtube.com/user/steph3n1 Team DBs (Driven By sound) Link to comment Share on other sites More sharing options...
herbykw Posted December 14, 2009 Author Report Share Posted December 14, 2009 PLan cancelled. the original idea would have had a box of 5 cubes, so i made it bigger. But did not take into account making it longer would hit the finder wells and would not fit. Stuck with first box. Cleaned up the wiring. and changed the tune of my box to 33 hertz. Hits a lil lower. Quote 06 300C 5.7 Hemi K&N CAI JVC KW-AVX640 6.1" DVD DC Audio 3.5k 6 DC Audio 8"s 6 cubes 8" aero port at 32hrtz http://www.stevemeadedesigns.com/board/topic/183798-chrysler-300c-8-build/?p=2731834#entry2731834 Link to comment Share on other sites More sharing options...
jp-kustomz Posted December 14, 2009 Report Share Posted December 14, 2009 you should try to trade it for 2 12s or somethin or angle it and just assemle in trunk Quote 95 Delta 88 10 inch fubar(2 MB Quart RWE-352 15" on way soon) 1500.1 crunch kenwood KDC-MP642U Jp Kustomz Link to comment Share on other sites More sharing options...
rmzsuzuki89 Posted December 14, 2009 Report Share Posted December 14, 2009 (edited) Maybe try building a new box inside the trunk to try and squeeze evry bit of volume outa your trunk. EDIT:^^^Beat me to it.^^^ Edited December 14, 2009 by rmzsuzuki89 Quote My Feedback Thread http://www.stevemeadedesigns.com/board/topic/103868-official-rmzsuzuki89-feedback-thread/page__pid__1441542#entry1441542 Link to comment Share on other sites More sharing options...
herbykw Posted December 14, 2009 Author Report Share Posted December 14, 2009 Maybe try building a new box inside the trunk to try and squeeze evry bit of volume outa your trunk. EDIT:^^^Beat me to it.^^^ the current box was built inside the trunk and the new plan was going to be. I do t have the $ for new subs. So if I get rid of my SoLo x then I only have the money I get from it. Quote 06 300C 5.7 Hemi K&N CAI JVC KW-AVX640 6.1" DVD DC Audio 3.5k 6 DC Audio 8"s 6 cubes 8" aero port at 32hrtz http://www.stevemeadedesigns.com/board/topic/183798-chrysler-300c-8-build/?p=2731834#entry2731834 Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.