Port Length

[UMGixxer]

Im using winisd to calculate my port length. Now lets say it says my port length should be 15" and my box is 30" deep. And my port sits in the middle of the box on the bottom, using the bottom board as a part of the port, lets say 4"h x 12"w. Would I cut the port piece 15", 17" or 13"????

Edited February 4, 2010 by UMGixxer

[Steph3n1]

Im using winisd to calculate my port length. Now lets say it says my port length should be 15" and my box is 30" deep. And my port sits in the middle of the box on the bottom, using the bottom board as a part of the port, lets say 4"h x 12"w. Would I cut the port piece 15", 17" or 13"????

if you subtracted the .75 from the external dims of the box them yes that is correct

[UMGixxer]

if you subtracted the .75 from the external dims of the box them yes that is correct

i must have confused you or something, I am wanting to know how long should the port physically be

[Tek]

I am wanting to know how long should the port physically be

half as long as it should emotionally be

[Guest]

half as long as it should emotionally be

fail joke

[arnold1992]

fail joke

rofl!...now that's funny hahah

[Tek]

fail joke

:01nocomment8so:

[UMGixxer]

ok can i get some actual help

[Dro]

thread fail

Edited February 4, 2010 by Dro

[Mac58]

Okay Im guessing this is not a round port enclosure.. I think what your trying to say is the calculator says your port should be half as long as your box is deep and you want to know how to account for this the right way? First we need to know Is it a slot? Slot L-shaped port? If it is a slot L then that would be fine to cut the port 15x whatever other dimensions you have if its just a slot... then someone else will need to help because Im not familiar with it btw... not sure what the pic is supposed to depict...

Edited February 4, 2010 by Mac58