BeachJoshua Posted April 9, 2010 Report Posted April 9, 2010 Okay, So I ripped the headliner out of my S-10 extended cab, The roof brace was bent down because of the flex I guess... Unless the neighbors cat is just that fat... anyways.. I've got a 1x1 with a rag on the end touching the brace between it and the brace, and I've been adding rags to it each day because it keeps getting loose, well it's not getting loose anymore, so what do I do now? I want the brace to stick to the roof again, and I don't want it to break off again, and I want the drivers side rear quarter of the roof from flexing. | S-10 | 4.5^3 ft | 33Hz | SAE-1000D @ 1 Ohm | 2 SA-12s | SPL: 143.7 Sealed | 153.4 Port Wars
BeachJoshua Posted April 9, 2010 Author Report Posted April 9, 2010 Nothing? | S-10 | 4.5^3 ft | 33Hz | SAE-1000D @ 1 Ohm | 2 SA-12s | SPL: 143.7 Sealed | 153.4 Port Wars
Recommended Posts
Archived
This topic is now archived and is closed to further replies.