Freshman6969 Posted April 14, 2010 Report Posted April 14, 2010 alright so i know im gunna sound like a total noob but i bought the phoenix gold 4g amp kit, the fuse hold i got with it had to be for 8g cuz there was no way in hell that ish was fitting, so i went today and bought the RF 8/4g fuse holder at best buy, it fits better but not enough for the screw to hold it in place, is there like a trick in order to get that ish in there or what? i mean im getting so frustrated!!!!!! Legal TL scores145.6 on the dash sealed up in the low 40hz area with the port out145.5 on the dash sealed up @30hz with the port inless then 1k clamped on a 3.5k! Why would you EVER WANT flex?huh?...flex is what can make the lows lower and more air being pushed correct? My FeedbackJeep-BuildlogPT LOSER buildlog
kl0wn Posted April 14, 2010 Report Posted April 14, 2010 Twist the wire, insert into hole, screw down TIGHTLY. Finished. Just make sure the wire is going all the way to the end of the hole so the screw is actually grabbing onto a good amount of wire. 06 Mini Cooper S Sundown, SoundQubed Cadence, XS Power 151s Sealed 155s Outlaw Windshield @ 37hz
Freshman6969 Posted April 14, 2010 Author Report Posted April 14, 2010 Im pretty sure there is some little adapter inside it that comes out and then you can fit 4 gauge in there. yeah dude i knew that lol but on the phoneix one there was none im pretty sure it was a stright 8g but the RF one i took the adaptor out and it gets about 3/4 of the way in i need it to go then just gets like a "bump" around the bottem b.c the wires too fat arggg, all during my break at work i was trying diffrent ways in order to get that shit in there and its so damn stubborn Legal TL scores145.6 on the dash sealed up in the low 40hz area with the port out145.5 on the dash sealed up @30hz with the port inless then 1k clamped on a 3.5k! Why would you EVER WANT flex?huh?...flex is what can make the lows lower and more air being pushed correct? My FeedbackJeep-BuildlogPT LOSER buildlog
Freshman6969 Posted April 14, 2010 Author Report Posted April 14, 2010 Twist the wire, insert into hole, screw down TIGHTLY. Finished. Just make sure the wire is going all the way to the end of the hole so the screw is actually grabbing onto a good amount of wire. that worked with the 8g but the 4g is about 3 times as thick and its a dirty bitch like my ex Legal TL scores145.6 on the dash sealed up in the low 40hz area with the port out145.5 on the dash sealed up @30hz with the port inless then 1k clamped on a 3.5k! Why would you EVER WANT flex?huh?...flex is what can make the lows lower and more air being pushed correct? My FeedbackJeep-BuildlogPT LOSER buildlog
kl0wn Posted April 14, 2010 Report Posted April 14, 2010 yeah dude i knew that lol but on the phoneix one there was none im pretty sure it was a stright 8g but the RF one i took the adaptor out and it gets about 3/4 of the way in i need it to go then just gets like a "bump" around the bottem b.c the wires too fat arggg, all during my break at work i was trying diffrent ways in order to get that shit in there and its so damn stubborn Oh okay, I misread about the wiring not fitting into the fuse holder. Just shave a little bit of the wire off, it won't hurt anything and it'll fit right on in. 06 Mini Cooper S Sundown, SoundQubed Cadence, XS Power 151s Sealed 155s Outlaw Windshield @ 37hz
UniqueSounds Posted April 14, 2010 Report Posted April 14, 2010 Oh okay, I misread about the wiring not fitting into the fuse holder. Just shave a little bit of the wire off, it won't hurt anything and it'll fit right on in. ^^^this 1997 Chevy Cheyenne Single Cab Pioneer DEH-3200UB Two sets of Orion 6.5" Components In Each Door AudioQue HDC3 15" ^^^ Its all For Sale!!!!! http://www.stevemeadedesigns.com/board/topic/99546-lots-to-sale-good-prices/ ^^^ AQ2200D Wow, such a flexy beast(see what i did there lol)
Freshman6969 Posted April 14, 2010 Author Report Posted April 14, 2010 worddd ill do it during school tom. lmao wile my brit lit teacher bugs out XD. thanks tho Legal TL scores145.6 on the dash sealed up in the low 40hz area with the port out145.5 on the dash sealed up @30hz with the port inless then 1k clamped on a 3.5k! Why would you EVER WANT flex?huh?...flex is what can make the lows lower and more air being pushed correct? My FeedbackJeep-BuildlogPT LOSER buildlog
Recommended Posts
Archived
This topic is now archived and is closed to further replies.